Epoxy injection mortar -GU-500

PRODUCT Good Use GU-500 is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges with mixing nozzle. The GU-500 is designed for bonding threaded rods and reinforcing bars hardware into drilled holes in concrete base and solid masonry materials. PRODUCT CODE - GU-500 650ML Injection Cartridge 1:1 two components - Pure Epoxy resin styrene free - Available size: 650ml (side by side cartridge) DESCRIPTION GU-500 650MLPure Epoxy 1:1 resin is a high performance, two-component pure epoxy resin system. Applied in one single action this resin will produce a high performance, strong fixing with exceptionally high chemical resistance. GU-500 provides rapid cure with adequate working time in temperate climates. APPLICATION - Fixing machines, handrails, steel constructions, wooden constructions, reinforcement bars, especially suitable for big diameter rebar and rods. - Bonding threaded rod and reinforcing bar into hardened concrete. - Suitable to resist loads in cracked or uncracked concrete base material for cases where anchor design theory and criteria applies. - Can be installed in a wide range of base material temperatures. - Medium & Heavy duty load applications. - High durability. - Ideal for indoor usage. PRODUCT FEATURES - High grip force, high adhesive force. - Longer working time. - Designed for use with threaded rod and reinforcing bar hardware elements. - Special application to larger bore diameter. - The product ingredient is odorless and non-toxic. - Wide temperature range(5°C~+40°C) - Styrene free. GU-500 650ML STATIC MIXER #818 GOOD USE HARDWARE CO., LTD. GU-500 650ML TDS P1/7 PURE EPOXY INJECTION MORTAR Date of Issue: July 17, 2020 GU-500 650ML TECHNICAL DATA SHEET ATTENTION - Do not install anchors when substrate temperature is less than 0℃. - Do not install anchors when the GU-500 mortar temperature is less than 15℃. - At temperatures below 15℃ GU-500 should be warmed or stored in temperatures of 15-30℃ for 24hours prior to use to improve product flow and cure. - If the gelling time expires, please use a new static mixer. - Do not cut or shorten nozzles. - If the cartridge is not finished, please clean the opening, then put the plug back and cap tightly. - It can be used again in the future by replacing the static mixer. - Please ensure hole is properly cleaned. Hole may be damp but must be free from water. - Do not dilute mortar with any solvents and/or other chemicals. - Not suitable for use in diamond cored holes without roughening. - Please ensure spiral mixer in nozzles. - Do not install into uncured concrete. - Please use Good Use nozzles, other nozzles may cause ineffective mixing and reduce the properties of the mortar. STORAGE/SHELF LIFE - 18months after the manufactured day in dry and dark environment with temperature ranging from 10°C~30°C. - Avoid direct sunlight. PACKAGING INFORMATION - Each cartridge is packed in plastic bag with 1 free static mixer #818.