Presence detector mini Universal, white-3361-1 M WW

with integrated BCU New in V 02: with temperature measurement (only “Universal” version) ETS product family: Physical sensors Product type: Movement Intended use Requirement-oriented control of lighting, room thermostats and other electrical loads in interiors Clamp mounting in suspended ceilings Ceiling installation on fixed ceilings in flush box with dimensions according to DIN 49073 with flush mounting set (ref.-no.: PMM-UP-SET-WW) Surface-mounted ceiling installation with surface mounting set (ref.-no.: PMM-AP-SET-WW) Product characteristics Integrated bus coupling unit 3 PIR sensors Detection field 360° Integrated brightness sensor Deployed as presence detector, motion detector, or for alert operation Output functions: Switching, staircase lighting function, switching with forced position, value transmitter, light scene extension, operating mode setting for room temperature controller Extension of the detection area by way of operating several devices as main unit or extension unit Adjuster for manual adjustment of sensitivity Status LED: Flashes during motion detection; depending on programming in normal operation or only during the walking test mode Additional characteristics of “Universal” version: Manual operation with IR remote control possible (ref.-no.: KNX PM FB IR) 5 function blocks for motion detection each with 2 outputs Function blocks switchable, e.g. for day/night operation PIR sensors can be evaluated separately Brightness sensor function with 3 limiting values Light control with max. 3 channels, setpoint adjustment in operation, separate configuration of dimming-up, control and dimming-down phase Light control can be combined with presence detector function Temperature measurement Presence detector function: Detection of the smallest motions e.g. at a workplace for detecting the presence of persons Switch on: Motion detection and brightness threshold not reached Switch off: No motion in the detection field and run-on time elapsed or brightness threshold exceeded Motion detector function: Motion detection for passageways in buildings After reacting and switching on, the motion detection works independently of the brightness. Signalling mode: Brightness-independent detection of motions in the detection field Switch on: After detection of an adjustable number of motions within the set monitoring period Switch off: No motion in the detection field and run-on time elapsed Universal Technical data about Presence detector mini Universal, white 3361-1 M WW KNX medium: TP 256 Rated voltage KNX: DC 21 … 32 V SELV Current consumption KNX: max. 10 mA Connection bus: terminal Protection class: III Ambient temperature: −25 … +55 °C Stora/transport temperature: −25 … +70 °C Relative humidity: 10 … 100 % (no condensation) Degree of protection: IP44 Ceiling cut-out (Ø x D): 44 x 35 mm Dimensions (Ø x H): 53.5 x 38 mm (with design ring) Max. thickness of the suspended ceiling: approx. 25 mm Installation depth: min. 35 mm Distance between concrete ceiling and suspended ceiling: min. 20 mm Design ring Ø inside: 36.6 mm Design ring Ø outside: 53.5 mm Height above surface, design ring: 3 mm Height above surface, lens: 5.5 mm Motion detection Detection angle: 360° Range: Ø approx. 12 m (mounting height 3 m) Brightness sensor Measuring range: 10 … 2,000 lx Accuracy (≤ 80 lx): ± 10 lx Accuracy (> 80 lx): ± 5 %