REDARC 2000W 12V RS3 Pure Sine Wave Inverter with ATS - R-12-2000RS3

Serious 240V power for 12V touring, caravan, canopy and commercial vehicle systems. The REDARC 2000W 12V RS3 Pure Sine Wave Inverter with ATS (R-12-2000RS3) converts 12V battery power into clean 230/240V AC power for suitable household appliances and sensitive electronics on the road. With an integrated Automatic Transfer Switch, built-in RCD/RCBO safety protection and 4000W surge capacity, it is designed for off-grid setups that need reliable mains-style power without a messy installation. Why it works so well in Aussie touring rigs • 2000W pure sine wave output for powering suitable appliances such as coffee machines, kettles, toasters, induction cooktops and electronics. • 4000W surge power for short start-up loads from demanding appliances. • Integrated Automatic Transfer Switch switches between battery power and mains/grid input when available. • Built-in RCD/RCBO safety protection helps protect against over-current, short-circuit faults and electric shock risk. • IEC input and output connectors simplify integration into caravan, canopy, motorhome and commercial vehicle electrical systems. • Whisper-quiet operation and vibration-resistant construction suit touring and remote-area use. • 12V input design suits common 4WD, canopy, caravan and camper battery systems. Why buy from us Real 12V system advice from a touring and installation-focused team Suitable support for caravan, 4WD, canopy, camper, boat and commercial vehicle power systems Fast QLD dispatch from our Baringa warehouse where stock is available Local backup before and after the sale Key features • REDARC part number: R-12-2000RS3 • 2000W 12V RS3 pure sine wave inverter • Continuous output power: 2000W • Surge power: 4000W for 2 seconds • AC nominal output voltage: 230/240V • DC input voltage range: 10.5–16.5V DC • Integrated Automatic Transfer Switch (ATS) • In-built Residual Current Device / RCBO safety protection • Input socket: IEC C14 • Output sockets: IEC C13 and AS/NZ 3112 10A GPO • Enhanced surge capacity for high-demand appliance start-up loads • Load-controlled cooling fan • Overload, short-circuit and over-temperature protection • Vibration-resistant construction • 2-year REDARC warranty What’s in the box • REDARC 2000W 12V RS3 Pure Sine Wave Inverter with ATS - R-12-2000RS3 • Product documentation as supplied Tech specs quick • Brand: REDARC • SKU / MPN: R-12-2000RS3 • GTIN / barcode: 9338628007271 • Inverter type: RS3 Pure Sine Wave Inverter • Nominal DC voltage: 12V • Battery input voltage range: 10.5–16.5V DC • Maximum rated battery input current: 224A DC • Recommended fuse protection: 250A fuse • Continuous output power: 2000W ±3% • Maximum power for 10 minutes: 2000–2300W • Maximum power for 3 minutes: 2000–2300W • Maximum power for 3 seconds: 2301–4000W • Surge power: 4000W for 2 seconds • AC output voltage: 230/240V AC • AC input voltage range: 216–244V AC • Grid input voltage range: 216–254V AC ±3%, 50Hz • Transfer time: <20ms • Efficiency: 88–92% • Standby current consumption: <2.8A • Saving mode current consumption: <0.2A @ 12.5V • Sleep mode current consumption: <0.07A @ 10.4V • Input socket: IEC C14 • Output socket: IEC C13 and AS/NZ 3112 10A GPO • Unit size: 443 × 261 × 126 mm • Unit weight: 6.8 kg • Boxed size: 540 × 225 × 390 mm • Boxed weight: 7.5 kg • Country of origin: Taiwan • Warranty: 2 years Important install note High-output inverters must be installed with suitable cable sizing, fusing, ventilation and battery capacity. REDARC recommends installation by a suitably qualified auto electrician or technician. Confirm appliance load, surge requirements and battery system capacity before installation.