MAKCU

The MAKCU is a professional-grade dual-chip USB passthrough device designed to provide a 1:1 physical bridge between your peripherals and your gaming PC. Utilizing a sophisticated dual-ESP32-S3 architecture, the MAKCU captures, modifies, and injects input signals at the hardware level, ensuring your movements remain indistinguishable from legitimate play. Dual-Chip Architecture: Powered by two high-speed ESP32-S3 microcontrollers working in synchronization, the MAKCU is a professional-grade USB passthrough device. This architecture creates a transparent bridge between your mouse and your PC, allowing for 1:1 hardware-level input modification with zero detectable software footprint. True USB Passthrough: MAKCU acts as a physical bridge. Unlike traditional spoofers, it allows your gaming PC to communicate directly with your mouse or keyboard. This ensures you can still use official manufacturer software (like Logitech G HUB or Razer Synapse) to adjust DPI, RGB, and profiles while the device remains active. 4-Million Baud Rate Support: Engineered for elite precision, MAKCU supports an ultra-high 4,000,000 bps baud rate. While standard devices are limited by slower transmission speeds, MAKCU can transmit movement and click commands in approximately 42.5µs—well within a single 1ms USB poll—providing the smoothest, most responsive aim assist in the industry. Web-Based Configuration: Manage your device with ease via the native MAKCU web interface. Update firmware, test inputs, and configure baud rates directly through any Chromium-based browser (Chrome/Edge), eliminating the need for suspicious third-party desktop configuration tools. TECHNICAL SPECIFICATIONS Processing Power Microcontrollers: Dual ESP32-S3 (Independent Side-Processing) Baud Rate: Dual Mode (115,200 or 4,000,000 bps) Input Lag: Sub-millisecond (Physical 1kHz Polling) Connectivity Ports: 3x USB-C (Device, COM, Host) Compatibility: PC, Console (Native M&K), and XIM Support Device Memory: Pre-flashed for instant deployment CONNECTIVITY & WORKFLOW USB 1 - Device Port: Connects directly to your Gaming PC or Console. This is how the system "sees" your mouse/keyboard. USB 2 - COM Port (Communication): Connects to your Secondary (Radar) PC. This port is the dedicated command line used by your DMA software to inject aim instructions without touching the gaming PC's USB bus. USB 3 - Host Port: This is where your physical Mouse or Keyboard is plugged in. MAKCU captures the raw data from your device here before processing and passing it to the gaming PC. INCLUDES USB-A to USB-A Cable ×2