Salted Butter Silicone Mould

Exclusive to Myka Candles & Moulds and hand-poured in Australia using premium platinum-cure silicone. Please allow up to 5 business days to be processed. Hop on the butter trend and make your own with our Salted Butter Stick Silicone Mould! Featuring embossed text, it’s perfect for creating fun butter-inspired pieces. Suitable for candle wax, soap, resin, Jesmonite, plaster, concrete and more. You can even pour liquid silicone into the mould to create your own soft butter squishy. Each mould includes a support shell that minimize bulging when wax is poured, ensuring that your candles come out looking flawless every time. Plus, with their high tear-resistance, these moulds are built to last for years to come, making them a smart investment for any candle maker. Wick the mould through the top and bottom on the mould to keep it centred. Pour in melted wax and allow your candle to cure overnight before carefully unmoulding. For best results, preheat your mould with a heat gun prior to pouring to ensure the wax fills in all the letters and prevent air bubbles getting trapped. To ensure optimal results, each mould includes a custom-fitted 3D printed support case. Because of their flexible design, moulds may naturally expand when filled. The included case helps maintain the mould’s shape during pouring and curing, resulting in a more consistent and professional finish. These cases are made from PLA plastic and will warp if exposed to heat—so please avoid using a heat gun directly on them or placing them near high heat sources. Additional support cases can also be purchased separately if required. Specifications Finished product: 14cm (H) x 4cm (W) x 4cm (L) Wax volume: 250g Cotton wick recommendation: 12 ply All measurements are approximate and will vary depending on the type of wax used and how much fragrance oil is added. Mould Performance & Storage The physical life of the mould depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode moild detail, while casting non-abrasive materials, such as wax, will not affect mould detail. Do not over-stretch or use any abrasive tools or fingernails when demoulding. Before storing, the mould should be cleaned with a soap solution and fully dry. Two part moulds should be assembled. Moulds should be stored on a level surface in a cool, dry environment to maintain its original shape. Disclaimer: mould is poured and trimmed by hand and therefore may have some minor exterior imperfections.