Protective Case for AudioMoth Dev with GPS & Auxiliary Board Mount

The AudioMoth Dev Case protective housing is an injection-molded, waterproof case for the AudioMoth Dev, allowing a fully flexible hardware configuration with integrated mounts and slots that enable the use of external microphones, GPS, high-capacity batteries, and custom auxiliary boards. The protective case is designed for simple installation, featuring two latches that compress a replaceable O-ring gasket. It is robust enough to withstand long-term deployments in remote locations, made of durable polycarbonate with a molded rain hood and a waterproof acoustic vent that helps protect the internal microphone. On the front of the protective case, there is a rectangular label area measuring 6.25 x 2.95 cm (62.5 x 29.5 mm). The bottom of the protective case features an M16 cap that can be replaced to allow the installation of external cable glands for plug-in powered (PIP) external microphones or hydrophones. On the back of the protective case, there are two Velcro straps that enable secure mounting in the field. Located between the latches is a security eyelet designed to deter tampering with the device. Key Features Slot available for the AudioMoth GPS board. Slot available for a custom daughterboard. GAW334 waterproof acoustic vent that protects the internal microphone. Security eyelet to deter device tampering. Interchangeable M16 cap, compatible with external PIP microphones or hydrophones. Specifications SKU AUDIOMOTH-DEV-CASE Material Polycarbonate Water Resistance IPX7 Dimensions 10 x 14 x 6.5 cm Compatible Branch/Pole Diameter 3 to 6 cm Compatibility AudioMoth Dev Label Area 6.25 x 2.95 cm Pressure Equalization Time 40 minutes In the Box 1x AudioMoth Dev Case Lid and Base 2x Velcro Straps for Mounting 1x D-Cell Battery Holder with Compatible Connecting Cable 1x O-Ring 1x M16 Cable Gland Cap 2x Latches Required Items AudioMoth Dev Optional Items D-cell batteries