BBbidet M829 Smart Bidet Toilet | 10 inch rough in toilet

The BBbidet M829 smart bidet toilet combines a compact 680 mm body with adjustable personal cleansing, a heated seat and warm air drying. A clean white ceramic exterior and three finish options complement contemporary bathrooms. Comfort and control Rear wash, front wash and oscillating cleansing modes. Self-cleaning nozzle rinses before and after use. Four water and seat temperature settings: ambient, 33°C, 36°C and 39°C. Warm air drying with a 180-second cycle and four settings: ambient, 45°C, 50°C and 55°C. Dedicated remote control and side rotary dial. LED temperature/status display and gentle bowl night light. Everyday convenience Automatic lid opening and automatic flushing after leaving the seat. Foot sensor control for flushing and seat lifting. Soft-close lid. Foam shield helps reduce splashing. Flushing-water filtration and integrated UV light for ceramic bowl hygiene. Dimensions and installation Model M829 Dimensions (L × W × H) 680 × 400 × 480 mm / 26.77 × 15.75 × 18.90 in Body Glazed ceramic Lid / seat material PP Wall outlet 180 mm Floor rough-in options 100–400 mm; confirm the required configuration before ordering Power rating in supplied specification AC 220 V, 50 Hz Flush system Siphon jet Ceramic bowl opening 240 × 330 mm Seat opening 210 × 320 mm 10 Inch Rough In Toilet Option with Smart Bidet Features Looking for a 10 inch rough in toilet with a built-in bidet? The BBbidet M829 can be configured for a 10-inch (254 mm) S-trap floor outlet, combining the required rough-in with warm-water cleansing, a heated seat and warm-air drying. P-Trap and S-Trap Configurations Choose a P-trap wall outlet with a 180 mm outlet centre height, or an S-trap floor outlet configured for your measured rough-in. Custom S-trap configurations are available throughout the 100–400 mm range, including intermediate measurements such as 150, 220, 254 and 280 mm. The correct configuration must be specified before ordering; one configuration is not a universal fit for every bathroom. 10, 12 and 14 Inch Rough-In Toilet Configurations Select the exact S-trap configuration for your floor outlet. The M829 is available as a 10 inch rough in toilet (254 mm), a 12 inch rough in toilet (304.8 mm), or a 14 inch rough in toilet (355.6 mm), each with a choice of three finishes. Floor rough-in Exact measurement 10 inches 254 mm 12 inches 304.8 mm 14 inches 355.6 mm How to Order the Correct Rough-In Configuration Measure from the finished wall behind the toilet to the centre of the floor waste outlet, excluding the skirting board. A 10-inch rough-in is exactly 254 mm, not 250 mm. If your measurement is not listed in the selector, contact us before ordering and request your exact rough-in rather than choosing the nearest size. Confirm the outlet connection, available floor space, water supply and electrical requirements with your installer. The listed M829 specification is AC 220 V, 50 Hz; confirm electrical compatibility for your destination before ordering. Finish and configuration optionsPure White, white with Blackish Green rear trim, and white with a Black rear display panel. Tank and tankless specifications vary by configuration. Electrolyzed water is an optional upgrade and is not included in every configuration. Before orderingConfirm the outlet type, floor rough-in where applicable, local electrical supply and selected feature configuration. Dimensions are measured manually and may vary slightly. Frequently asked questionsCan I control the M829 with a phone?The international version uses the dedicated remote and side dial; app control is not offered.Does it support wall and floor outlets?Wall outlet height is 180 mm. Floor rough-in configurations from 100 to 400 mm are available; select the correct installation configuration before ordering.Is electrolyzed water standard?No. It is an optional feature whose availability depends on the selected configuration.