MM50 shelving unit, galvanized add-on module

Load capacity per shelf (kg) Load uniformly distributed on each loading level Width Depth mm 400 600 800 1000 1200 340 kg 340 kg 340 kg 340 kg 1400 290 kg 290 kg 290 kg 290 kg 1600 250 kg 250 kg 250 kg 250 kg 1800 220 kg 220 kg 220 kg 220 kg Interlocking metal shelving designed for medium-duty systems with a continuous support surface. The structure consists of uprights, beams, and panels, all made from steel strips profiled with technical features that ensure high strength, stability, and flexibility of use. It is recommended to position the first shelf at a height no greater than 700 mm from the ground. Technical features Shelves adjustable in height every 25 mm Shelf depth: 60 mm Standard finish: galvanized Maximum bay load capacity: 4000 kg (with shelf spacing of 600 mm and first shelf max 200 mm from the ground) Shelf capacity: up to 340 kg, varying according to the chosen width Loads intended as uniformly distributed Floor fixing anchors included (as required by current regulations) Additional module configuration The additional module consists of: 1 side frame Desired number of shelves It must always be installed by hooking it directly to the previous module, of the same depth, with which it will share the side frame. Compatibility with base module This item is an additional module and necessarily requires the presence of a base module for the correct installation of the shelving. Calculation of total system width To determine the overall dimensions of the shelving, consider: +120 mm fixed for the base module +50 mm for each additional module installed It is recommended to maintain an adequate technical margin to compensate for any irregularities in orthogonality between the floor and walls. Assembly and safety Use the supplied anchors for floor fixing, checking the consistency of the slab beforehand. Before placing the sheet metal panels of the shelf, insert the supplied safety accessory into the pair of holes located under the horizontal crossbeams. For better insertion, slightly bend the rod into a "V" shape in the center to ensure greater grip before positioning the panels. Note on regulatory classification and declared capacities MM50 shelving falls into Class 3 (according to current regulations) in order not to be subject to seismic parameters despite having superior load capacity performance as reported in the product sheet. In case of explicit request, MAYERMOOVER can certify the actual capacities with a table, seismically dimensioning the structure with the required parameters and adjusting the cost accordingly. In this case, the technical development times and delivery process will be revised. This classification is for regulatory purposes only and does not reduce the structural performance of the product. The declared capacities represent the official usage values: Capacity per level: 200 kg (uniformly distributed) Maximum capacity per bay: 1000 kg total The product is designed for industrial use and is dimensioned to guarantee robustness and reliability in compliance with the values indicated above. The reported data must be considered binding provided correct installation, use and maintenance. Assembly diagram upright 400 mm Assembly diagram upright 600 mm Assembly diagram upright 800/1000 mm Notes and customizations Upon request, individual components (uprights, beams, shelves) can be purchased. Also available is the version with painted uprights and beams in the following colors: RAL 5010 RAL 1003 White (no RAL) For delivery times and personalized quotes, please contact the sales office.