Precision Lumatrol A-105W 120V Wire-In Button Photocontrol with Wall Plate

The Precision Lumatrol A-105W Wire-In Photocontrol provides automatic dusk-to-dawn control for outdoor lighting operating at 120 volts. Its compact button-style sensor is supplied with a gasketed wall plate for installation on a standard electrical outlet box. The broad-surface photocell automatically switches the connected lighting on when ambient light falls to approximately 1–3 foot-candles. A minimum 15-second time delay helps prevent unwanted switching caused by lightning, vehicle headlights, and other brief changes in light level. Features Automatically turns outdoor lighting on at dusk and off at dawn 120VAC operation 1100VA load rating Broad-surface light-sensing photocell Factory-set turn-on level of 1–3 foot-candles 1:3 turn-on-to-turn-off ratio Minimum 15-second time delay reduces false switching Single-pole, single-throw switching Normally closed contact position at night Durable, high-impact Lexan housing Ultrasonically welded construction for added strength Color-coded lead wires simplify installation Includes gasketed metal wall plate, mounting screws, and nylon locknuts Fits a standard electrical outlet box Suitable for wall packs, post lights, power pedestals, and other outdoor-lighting applications Specifications Manufacturer Precision Multiple Controls Brand Lumatrol Model A-105W Product Type Wire-In Button Photocontrol Voltage 120VAC Load Rating 1100VA Turn-On Level 1–3 foot-candles Turn-On/Turn-Off Ratio 1:3 Time Delay Minimum 15 seconds Switch Type Single-pole, single-throw Operating Temperature -30°F to 140°F Lead Wire Length 9 inches Threaded Stem 3/8"-18 thread; 1" long Photocontrol Dimensions 2"H × 1-1/4"W × 3/4"D; 1-1/2"D including stem Wall Plate Dimensions Approximately 2-3/4"W × 4-1/2"H Important Installation Information The photocontrol’s body and housing must be installed inside a weatherproof enclosure to protect it from water damage. Only the threaded portion of the photocontrol is weatherproof. Installation should be completed with the electrical power turned off and in accordance with applicable electrical codes.