0.96 Inch IPS LCD Display Module 80x160 RGB 65K Color SPI ST7735S

Description Specifications Box Content Downloads More Info The 0.96" IPS TFT LCD Display Module is a compact, full-color screen driven by the ST7735S controller IC. With a resolution of 80x160 pixels and true IPS panel technology, it delivers vibrant 65K colors and a full viewing angle with no color distortion. It communicates via a 4-line SPI interface, requiring only a few GPIO pins, making it easy to integrate with virtually any microcontroller including Arduino, STM32, ESP32, Raspberry Pi, and more. Features: ST7735S Driver IC IPS panel — full viewing angle, no color distortion 65K RGB color display 4-line SPI interface — minimal GPIO required Input Voltage: 3.3V Resolution: 80 x 160 Pixels Built-in backlight control Compatible with Arduino, STM32, ESP32, Raspberry Pi, 8051, PIC, AVR, ARM Applications: Wearable devices Embedded systems and IoT projects Handheld instruments Industrial and security equipment MP3 / media players Smart home displays Pin Definition: Pin Name Description 1 GND Power ground 2 VCC Power supply positive (3.3V) 3 SCL SPI bus clock signal 4 SDA SPI bus write data signal 5 RES Reset control signal (active low) 6 DC Register/data selection (Low: register, High: data) 7 CS Chip select, active low 8 BLK Backlight control (High: on; connect to 3.3V if control not needed) Display Type IPS TFT LCD Driver IC ST7735S Resolution 80 x 160 Pixels Display Color RGB 65K Colors Screen Size 0.96 inch Active Area (AA) 10.80 x 21.70 mm PCB Size 30.00 x 24.04 mm Interface 4-line SPI Input Voltage 3.3V Luminance 380 cd/m² LED Current 23.4 mA Power Consumption 0.13W Viewing Angle Full Angle (IPS) Operating Temperature -30°C to +80°C Storage Temperature -30°C to +80°C Product Weight 8 grams 0.96" IPS TFT LCD Display Module (ST7735S) Connection Please refer to the pin definition table in the Description tab for wiring details. Connect VCC and GND to 3.3V and ground respectively. SCL, SDA, RES, DC, and CS connect to your microcontroller's SPI and GPIO pins. BLK connects to 3.3V to keep the backlight on, or to a GPIO pin for software control. Datasheet Click Here to Download ST7735S Datasheet Click Here to Download Display Specification Tutorials LCD Wiki — Full User Manual, Sample Code & Schematics Country of origin: China Note: This module operates at 3.3V only. If using with a 5V microcontroller such as Arduino UNO, a logic level converter is required to avoid damaging the display.