Honesuki 150mm

This Tetsu Honesuki feature a small size blade, good distal taper, K tip and scraper. Flat profile from the heel with a curve toward the tip. Asymmetric grind 60-40 on the right side. The San-mai is laminated by myself in house. Forged to shape and to geometry the blade is ground on water cooled grinding wheel then finish by hand on bench stone. Specs : - Name : Honesuki - Year : December 2025 - Construction : San-maï (3 layers) - Range : Tetsu KU - Geometry : Medium (asymmetric grind) - Blade length (heel to tip) : 150mm - Blade height (at the heel): 40mm - Hagane : 26C3 - Jigane : Wrought iron - Handle : Wa (octogonal) with Walnut - Balance point : at the touch mark - Distal taper : 4.8 / 2.8 / 1.2 mm - Weight : 123.3 grams - Finish : Kurouchi with Kasumi - Special feature : Take down handle with brass pin and tool - Observation : Scraper on the spine near the tip to clean bones - Hardness : ≥ 64HRC Allow me a couple of days to sharpen and send the knife to you. If any question or requirement, just message me at hello@simonmaillet.com. My blades are made from carbon steel not stainless steel as it gives my knives an unbeatable sharpness. I prefer carbon steel for it ease to sharpen, the fine edge it takes and the beautiful patina that will develop. You do, however, need to give carbon steel knives just a little extra care to keep them in top shape. There are trade-offs in everything. Claddings stated as "dirty wrought iron" will be more reactive. My handles are made from local, untreated, un-stabilised wood. I use oil and varnish to protect them. The color, may change with use. French postage with Chronopost / Colissimo International postage with DHL express / UPS