HPE ProLiant DL145 Rack Server (G11) Configuration | P71964-B21

Quick Specs (1) AMD 4th/5th Generation AMD EPYC™ Processors (6) 4800 or 6400 MT/s DDR5 Max Memory 768 GB (3) PCIe5 x16 (16, 8, 4, 1) (1) OCP slot (External) Supports up to (2 SFF or 6 EDSFF) Drives Support NS204i-u v2 for boot HPE iLO 6 ASIC & TPM 2.0 (3) GPU Supported Other Versions View All DL G9 View All DL G10 View All DL G10+ View All DL G11 (Click to View) Ideal for: AI Edge Servers HPE DL145 G11 Drive Cage Options The HPE ProLiant DL145 Gen11 server is a 2U, single processor, robust edge computing server designed to cater to the needs of retail, manufacturing, telecommunications, and various other industries. It offers a compelling alternative to traditional servers with its sleek design, affordable pricing, and quiet operation. DL145 G11 SFF P71977-B21 DL145 G11 4x EDSFF P71985-B21 DL145 G11 6x EDSFF P71981-B21 HPE DL145 G11 Heatsink 2U Heatsink (STD) 1U Heatsink GPU air Baffle Notes 1U Heat Sink is required for full length card. 2U heatsink is not supported with Nvidia L40S and RTX PRO 4500 GPU If DW GPU is selected, then 1U Heat Sink, DW GPU Cable Kit and DW GPU Air Baffle Kit must be selected HPE DL145 G11 Fans Up to 4 Fans Standard Fan High Performance Fan Notes 2 SFF - STD Standard fan 4 E3.S, or 6 E3.S - HPR High performance fan HPE DL145 Gen11 NS204i-u Boot Device HPE NS204i-u Boot Device is an optional front-panel PCIe 5.0 module for the DL145 Gen11 with two hot-pluggable 2280 M.2 NVMe SSDs. It delivers dedicated hardware RAID 1 boot mirroring that auto-creates the volume at boot and supports Windows, Linux, and VMware via native drivers. Requirements: NS204i-u enablement kit, matching SSD model/firmware on both bays, latest iLO and BIOS firmware, dedicated cables (blue power P54088-001 and orange signal P54087-001), T-10 Torx screwdriver, antistatic precautions, and populated bays or blanks for cooling. Manage via UEFI System Utilities. HPE DL145 Gen11 PCI Risers If "Slot 1 Riser Kit " is selected, then "Slot 2 Riser Kit " must be selected. These Riser cards are stacked ontop of eachother. To get power and PCIe lanes to the Slot 1 at the top. All risers cards need to be stacked. Riser Assembly 3x PCIe Gen5 x16 FHHL Shipping default in ALL CTO server 3x PCIe Slots P60861-001 Slot 1 stacking riser P60422-001 Slot 2 stacking riser P59443-001 Slot 3 1U base riser Stacking Riser Cards If "Slot 1 Riser Kit " is selected, then "Slot 2 Riser Kit " must be selected (NOT VICE VERSA). Notes: P71989-B21 - HPE ProLiant DL145 Gen11 Slot 2 Riser Kit P71991-B21 - HPE ProLiant DL145 Gen11 Slot 1 Riser Kit HPE DL145 Gen11 GPU If "Slot 1 Riser Kit " is selected, then "Slot 2 Riser Kit " must be selected. These Riser cards are stacked ontop of eachother. To get power and PCIe lanes to the Slot 1 at the top. All risers cards need to be stacked. NVIDIA L4 24GB S0K89C Memory: 24 GB GDDR6 Power: 72 W TDP Form Factor: SW LP PCIe: 4.0 x16 NVIDIA L40S 48GB S2L70C Memory: 48 GB GDDR6 Power: 350 W TDP Form Factor: DW PCIe: 4.0 x16 NVIDIA RTX PRO 4500 32GB S6W30C Memory: 32 GB GDDR7 ECC Power: 165 W TDP Form Factor: SW FH/FL PCIe: 5.0 x16 Notes: Cannot mix Doublewide and Singlewide GPU. If Doublewide GPU is selected, then Slot 1 Riser Kit cannot be selected If DW GPU is selected, then 1U Heat Sink, DW GPU Cable Kit and DW GPU Air Baffle Kit must be selected 2U heatsink is not supported with Nvidia L40S and RTX PRO 4500 GPU MIL-STD-810H environmental requirements MIL-STD-810H testing was performed on the HPE ProLiant DL145 Gen11 configured with the Military Ruggedization FIO Kit (P87008 B21). This factory installed option reinforces internal mechanical structures including drives, network adapters, power supplies, and retention mechanisms. The kit enables the system configuration to meet MIL-STD-810H environmental requirements for altitude, temperature, humidity, vibration, and shock. Contact us today about the DL145 MIL Server Test Category Method Procedures Notes Altitude Storage 500.6 I 40Kft Altitude Operation 500.6 II 15Kft Altitude Operation 500.6 III 8Kft/40Kft High Temp Storage 501.7 I +85 °C High Temp Operation 501.7 II +55 °C High Temp Tactical Standby 501.7 III +60 °C Low Temp Storage 502.7 I -55 °C Humidity 507.6 II 95%, 10 cycles Vibration 514.8 I Category 8, Propeller Aircraft Vibration 514.8 I Category 12, Jet Aircraft Vibration 514.8 I Category 20, Ground Vehicles (Common Carrier Profile) Vibration 514.8 I Category 21, Shipboard Random Vibration Shock 516.8 I Functional Shock; 20g, 11ms HPE DL145 Gen11 Lights Out! iLO HPE iLO 6 is the 6th-generation Integrated Lights-Out management processor built into HPE ProLiant Gen11 servers (including the DL145 Gen11). It delivers secure out-of-band remote management, allowing you to monitor, control, and troubleshoot the server even when the OS is down or the server is powered off. Key features include a hardware Silicon Root of Trust, enhanced security (secure boot, attestation), Redfish-compliant RESTful API, improved remote console, virtual media, and seamless integration with HPE Compute Ops Management and OneView.