Ridewell Pacbrake HP625 12V Air Compressor Kit -- Vertical Head, 3/4 HP, 150 PSI -- 1230236 / HP10632

Product Overview The Ridewell 1230236 air compressor is a Pacbrake HP625 Series 12VDC Basic Air Compressor Kit, Pacbrake part number HP10632. This kit uses the HP625 3/4 HP compressor in a vertical pump head configuration and is built for air tank applications requiring 150 PSI maximum working pressure and 100% duty cycle at 100 PSI. Key Details Ridewell Part Number: 1230236 Pacbrake Part Number: HP10632 Brand / Manufacturer: Pacbrake Series: HP625 Product Type: 12V air compressor kit Configuration: Vertical pump head Horsepower: 3/4 HP Voltage: 12V DC Duty Cycle: 100% at 100 PSI Maximum Working Pressure: 150 PSI Rated Flow: 3.4 SCFM Maximum Current Draw: 42 amps Specifications Specification Value Voltage 12V DC Operating Voltage 12V DC +/- 15% Horsepower 3/4 HP Motor Type Permanent magnet DC Nominal Speed 3000 RPM Maximum Current Draw 42 amps Rated Flow 3.4 SCFM Maximum Working Pressure 150 PSI Maximum Restart Pressure 5 PSI Duty Cycle 100% at 100 PSI Maximum Continuous Run Time 60 minutes Ingress Protection IP52 Ingress Protection with Remote Intake IP55 with HP10115 remote air intake kit Ambient Temperature Range -22 deg F to 158 deg F Finish Gunmetal grey / silver Head Configuration Vertical Dimensions 11.5 in L x 6 in W x 9.5 in H Weight 18.5 lb Compressor Features Oil-less compressor design Sealed bearings PTFE piston ring Copper wire wound permanent magnet motor Cast steel cylinder with hard anodized aluminum sleeve Mountable in any orientation Vertical pump head configuration 12V Compressor Fill Times Tank Size Tank Part Number 0 to 100 PSI 100 to 150 PSI 1/2 gallon HP10053 12 seconds 8 seconds 2-1/2 gallon HP10050 60 seconds 46 seconds 5 gallon HP10094 156 seconds 127 seconds Included Items HP625 Series 12V air compressor Vertical pump head configuration Unloader assembly components Air distribution block Pressure switch Unloader valve One-way check valve Air inlet port and two air outlet ports 60 amp circuit breaker Brass fittings Copper discharge tube Mounting hardware Installation sheet Notes This listing is for the 12V Pacbrake HP625 vertical head compressor kit, Pacbrake part number HP10632. HP625 Series compressors require an unloader assembly when used with an air tank. This kit includes unloader assembly components. The optional HP10115 remote air intake kit is sold separately and is used for installations with significant exposure to the elements. This is not the 12V horizontal head version HP10631 or the 24V vertical head version HP10633. Performance specifications are for the 12V HP625 compressor only.