AMBROSIA PPS-CF Filament of the Gods - 1KG Bambu AMS Friendly High Temperature PolyCarbonate Spools Premium 3D Printing Filament

This filament is highly abrasive, we strongly recommend printing with Tungsten Carbide Nozzle like the Undertaker Feed your Printer the Filament of the Gods. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. Feed your Printer the Filament of the Gods. PPS-CF (Polyphenylene Sulfide - Carbon Fiber) filament offers superior industrial performance over standard materials like ABS, featuring extremely high heat resistance, exceptional chemical resistance, high stiffness, and low moisture absorption. It is a high-performance material ideal for harsh environments, providing superior dimensional stability, reduced warping, and greater strength, making it suitable for automotive and aerospace applications.. Arrives to you in a cardboard box, with filament wound in a polycarbonate spool, vacuum sealed with a desiccant bag. Diameter: 1.75mm (+/-0.03mm) Filament Net Weight: 1KG Check out our other lines of Ambrosia Filament! ASA ASA-CF ASA Sparkle ASA Dolos ABS+ PETG PLA PLA Dolos PC-ABS PC-CF TPU ABS Matte ASA-GF PLA-SILK PHA PPS-CF Ambrosia Filament's Recommended Print Settings for our PPS-CF filament: Attribute Accepted Value(s) [Our Recommended Value] Extruder Temperature 300-350 Degrees Celsius [340] Heated Bed 90-110 Degrees Celsius [100] Build Surface PEI, Buildtak, or similar surface [Textured PEI] Cooling Fan 0-40% range varies by cooling capabilities Environmental Temperatures 40-120C [70C] Soluble Support Materials Technical Specifications for our PPS-CF Filament: Physical Properties Test Methodology Values Density ISO1183 1.3-1.31 g/cm^3 Melt Flow Rate (250C/2.16KG) ISO 1133 3-6 g/10min Mechanical Properties Test Methodology Values Tensile Strength ISO 527 100-110 Mpa Elongation at break ISO 527 1-3% Flexural Modulus ISO 527 5500-6000 Mpa Flexural Strength ISO 178 170-180 Mpa Impact Strength ISO 180 25-30 KJ/m^2 Thermal Dynamic Properties Test Methodology Values HDT@ 0.455 MPa(66 psi) ISO 75 245C Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.