Staerk Strong As Nails MS Flooring

Product Code: 15-VER5 It’s a premium one-component MS timber flooring adhesive, solvent-free, specially designed for forming direct elastic bonding of wooden floors to many different substrates. It is widely used because of its high strength adhesion and remarkable elasticity, allowing thermal movement and improving sound insulation. It has high thermal resistance and combined with many other excellent performances, it is the perfect wood floor adhesive. Properties: High Strength – Excellent Elasticity – Sound Insulation – 20y. Guarantee Timber Flooring Bonding of any hard or soft wood strip flooring Fixing veneer or composite flooring planks Flooring Systems Most types of floors allowing for thermal movement Repairing Existing Floors Can do big or small repairs to any type of internal or external wooden flooring Fixing loose ceramic, cork, stone or porcelain tiles Wooden Parquet Laminating together and gluing to substrate of complicated and demanding jobs like wooden parquet Strong as Nails MS Flooring construction adhesive is a specialised flooring tool for these materials: TIMBER, PARTICLE BOARD, MDF PLYWOOD, HARD & SOFT WOODS CONCRETE, BRICKS, FIBRE CEMENT STONE, MARBLE, CERAMIC ALUMINIUM AND DIFFERENT METALS Water free Will not cause warpage or curl of wood blocks/planks Permanently flexible Compensates for subfloor movement High bond strength Meets and exceeds AS2329, mastic adhesives and excellent gap filling properties. Bridges gaps up to 5mm-effective when used on uneven surfaces 20y. Guarantee Against cracking, pealing or crumbling under proper usage. We give one of the longest and comprehensive guarantees in the industry How to use All surfaces must be solid and structurally sound, clean, permanently dry and free from dust, grease or other contaminants that can affect adhesion. Existing floors must be free from all wax, silicone, sealers or any other surface substances that can potentially affect bonding. Always check moisture content of the substrates. For cement based substrates with a moisture content >2 % CM (Carbide Method) but < 4 % CM, and apply liquid damp proofing membrane. Flooring substrate must be adequately protected with vapour barrier from moisture ingress under hydrostatic pressure. New construction concrete must be cured for at least 28 days prior to installation. Dont apply damp proof membranes on top of a wet screed. If moisture levels are above those recommended by the flooring manufacturer but below 4 % CM consult with the flooring supplier (generally 9% ±2%). Recommended air temperature during installation – between 10°C – 35°C, humidity between 40% and 75%. Do not install if the walls and ceilings of the area are not dry. If underfloor heating is operational, turn off 24 hours before, and until 7 days after applying the adhesive. Subfloor must be flat to 3mm over 3 meter, otherwise it will increase the risk of hollow spots under timber overlay. Application Apply the adhesive with appropriate force and speed. Spread the adhesive with the proper notched trowel, apply uniformly on the subfloor. Avoid adhesive pools and excessive adhesive thickness by passing the trowel evenly through the adhesive at a 45 degree angle. Make sure the wood is positioned on subfloor within the working time of the adhesive. Minimum 80% of adhesive contact coverage is recommended to achieve proper installation of parquet floor. Place heavy objects to hold the wood firmly in place during the curing time, especially on bowed boards or boards over low spots. It may be necessary to sort out bowed planks before installation. Installing wood too tight against a wall or other stationary objects will not allow room for normal wood expansion If you use wedges or some object to hold wood in place while adhesive dries. Remove wedges after initial setting of adhesive (approximately 2 hours) to allow for normal expansion of wood. If you don’t remove the wedges can cause the wood flooring to buckle or pop off the substrate. No foot traffic for a minimum of 24 hours. Wait a minimum of 48 hours before sanding and varnishing. Coverage Depends of the V-Notched Or Square notched trowel size and flooring type ( ref to manufacturer spec ): V Notch 3/16” x 5/32” – Up to 1.2 m²/L Square Notch 1/4” x 1/4” x 1/8” – Up to 1 m²/L Square Notch 1/4” x 1/4” x 1/4” – Up to 0.9 m²/L Square Notch 1/8” x 1/8” x 1/8” – Up to 2 m²/L Health and Safety Non toxic when dry If medical advise is needed have product container and label at hand Read label before use Gloves and goggles must be worn during application If skin contact occurs remove the sealant with cloth and wash skin thoroughly with water and detergent for a minimum of 15mins Avoid eye contact before curing. If this occurs rinse opened eye for several minutes under running water, then consult a doctor Ensure proper ventilation at workplace or curing area Keep away from children Storage Protect from freezing, store in a cool dry place below 25 C temperature to prolong its service life. The product must be used within 24 months of DOP. Download Technical Data Sheet Download Safety Data Sheet