B6 Mini Balance Charger for LiPo Li-ion NiMH RC Batteries

B6 Mini Balance Charger/Discharger for RC Batteries The B6 Mini Balance Charger/Discharger is designed for RC battery charging, discharging and maintenance. It supports common rechargeable battery types including LiPo, Li-ion, LiFe, LiHV, NiMH, NiCd and Pb batteries, making it suitable for RC cars, drones, aircraft, boats, airsoft batteries and hobby battery packs. Multi-Battery Support: Works with common rechargeable RC battery types. Balance Charging: Helps keep lithium battery cells balanced during charging. Easy LCD Operation: Clear display shows mode, voltage, current and charging status. Built-In Protection: Safety functions help protect against common charging risks during proper use. Ready-to-Use Kit: Includes charger, power supply and adapter cables for convenient setup. Specifications Product Type: Balance Charger / Discharger Supported Battery Types: LiPo / Li-ion / LiFe / LiHV / NiMH / NiCd / Pb Lithium Battery Support: 1S–6S Functions: Balance Charge / Charge / Fast Charge / Storage / Discharge / Cycle Display: Backlit LCD screen Charging Current: Adjustable by battery type and capacity Connection: Main output port and balance port required for lithium balance charging Package Includes 1 × Balance Charger/Discharger 1 × Power Supply 1 × XT60 Extension Board 2 × Adapter Cables 1 × Connection Cable 1 × User Manual Charging Instructions Please follow the connection diagram below and connect each component in the correct order before turning on the charger. Step-by-Step Connection Guide Insert the power cable into the charger. Connect the battery main plug to the matching adapter or charging cable. Insert the charging cable into the charger output port and confirm correct polarity. Connect the battery balance plug to the matching balance port on the charger. If using the extension board, connect the battery to the matching slot on the board. After all cables are connected correctly, turn on the charger. Operating the B6 Charger Press Batt.Type to select the correct battery type. Press Start, then use Dec or Inc to set the correct charging current and voltage. Press and hold Start for about 3 seconds to enter charging mode. Press Start again to confirm and begin charging. When charging is complete, the charger will beep. Turn off the charger and unplug the battery after charging. Charging Time Guide Charging time depends on battery capacity, charger output power, selected current and battery condition. Larger capacity batteries require longer charging time. For example, when charging a 4S 2200mAh LiPo battery with an 80W charger: Maximum charge current = 80W ÷ 16.8V ≈ 4.7A Estimated charge time = 2200mAh ÷ 4700mA ≈ 0.7 hour After the battery reaches full cell voltage, the charger may enter a constant-voltage phase, which can add extra charging time. Charging & Safety Always select the correct battery type, cell count, voltage and charging current before charging. Always connect the balance plug when balance charging lithium battery packs. Do not charge damaged, swollen, leaking or overheated batteries. Do not leave batteries unattended while charging. Use the charger on a non-flammable surface and keep it away from heat, moisture and flammable materials. Stop charging immediately if abnormal heat, odor, smoke or error warnings occur. Turn off the charger and unplug the power cord after charging is complete.