Arduino UNO R3 CH340 Complete Starter Kit for Electronics Projects

The Most Complete Starter Kit for Arduino UNO R3 The Most Complete Starter Kit for Arduino UNO R3 is a full learning kit for students, beginners, hobbyists, and makers who want to start building Arduino projects. It includes an UNO R3 CH340-compatible board, sensors, displays, motors, wires, modules, and basic electronic parts for hands-on practice. This kit is a great choice for learning Arduino IDE, basic coding, circuit wiring, sensor reading, LCD display output, motor control, relay switching, and simple automation. It gives users many parts in one kit, so they can build different projects without buying each component one by one. Why Choose This Starter Kit? Good starter kit for learning Arduino and electronics. Includes an UNO R3 CH340-compatible controller board. Comes with sensors, displays, motors, wires, and basic components. Useful for school projects, STEM activities, and lab practice. Great for LED, buzzer, keypad, motor, relay, and sensor projects. Includes a plastic storage box for keeping the parts organized. What You Can Build LED blinking and traffic light projects Temperature and humidity monitor LCD1602 display projects 7-segment display counter RFID card reading project Ultrasonic distance sensor project Sound sensor and buzzer alert project Servo motor and stepper motor control Relay switching project IR remote control project Joystick and keypad input project Water level sensor project Mini fan and DC motor experiment What’s Included in the Kit? This kit includes the following parts based on the package list: RC522 RFID Kit - 1 pc UNO R3 CH340 Board with cable - 1 pc 5V Relay - 1 pc IR Receiver Module - 1 pc 830 Point Breadboard - 1 pc SG90 Servo - 1 pc Stepper Motor - 1 pc ULN2003 Stepper Motor Driver Board - 1 pc Prototype Expansion - 1 pc Power Supply Module - 1 pc Ultrasonic Sensor - 1 pc 3V Servo Motor with Soldered Wire - 1 pc White LED - 5 pcs Yellow LED - 5 pcs Blue LED - 5 pcs Green LED - 5 pcs Red LED - 5 pcs RGB LED - 1 pc Photoresistor - 2 pcs Thermistor - 1 pc Diode Rectifier 1N4007 - 2 pcs NPN Transistor PN2222 - 2 pcs Tilt Switch - 1 pc Small Button - 5 pcs 1 Digit 7-Segment Display - 1 pc 4 Digit 7-Segment Display - 1 pc Sound Sensor Module - 1 pc LCD1602 Module with Pin Header - 1 pc IC L293D - 1 pc IC 74HC595 - 1 pc Active Buzzer - 1 pc Passive Buzzer - 1 pc DHT11 Temperature and Humidity Module - 1 pc Potentiometer - 1 pc Joystick Module - 1 pc Membrane Switch Module - 1 pc Fan Blade - 1 pc Remote Control - 1 pc 65 Jumper Wires - 1 set Water Level Sensor - 1 pc USB Cable - 1 pc 9V Battery Connector with DC Plug - 1 pc Resistor 10R - 10 pcs Resistor 100R - 10 pcs Resistor 220R - 10 pcs Resistor 330R - 10 pcs Resistor 1K - 10 pcs Resistor 2K - 10 pcs Resistor 5.1K - 10 pcs Resistor 10K - 10 pcs Resistor 100K - 10 pcs Resistor 1M - 10 pcs Female-to-Male Dupont Wire - 10 pcs Resistance Identification Card - 1 pc Plastic Storage Box - 1 pc Technical Specifications Product Type Arduino UNO R3 starter kit Main Board UNO R3 CH340-compatible controller board Software Support Compatible with Arduino IDE Included Parts Sensors, displays, motors, wires, modules, ICs, and basic electronic parts Best For Arduino learning, school projects, STEM kits, and electronics practice Skill Level Beginner to intermediate Power and Wiring Notes The UNO R3 CH340-compatible board can be powered through USB for basic tests. For motors, relays, servos, and other higher-current projects, use the correct external power source when needed. Always check the wiring before powering the circuit. Some computers may need a CH340 driver before the board appears in the Arduino IDE. After the driver is installed, select the correct board and COM port before uploading code. Recommended Add-ons Arduino boards and shields Sensors and modules Motors and motor drivers Jumper wires and breadboard parts FAQ Is this kit good for beginners? Yes. This kit is good for beginners who want to learn Arduino, basic electronics, and coding. Does it include the UNO R3 board? Yes. It includes an UNO R3 CH340-compatible board. Can I use this with Arduino IDE? Yes. The board can be programmed using Arduino IDE. Does it include sensors? Yes. It includes modules such as DHT11, ultrasonic sensor, sound sensor, water level sensor, IR receiver, photoresistors, and thermistor. Does it include motors? Yes. It includes an SG90 servo, a stepper motor, a 3V servo motor, a ULN2003 driver board, and a fan blade.