Arccaptain CUT55 Prolux 55A Dual-Voltage Plasma Cutter PPE Kit

The ARCCAPTAIN CUT55 Prolux CUT-PPE Kit includes the 55A dual-voltage plasma cutter, two 24-piece AG60 consumable packs, a random-color welding helmet, and welding gloves. It suits repair, fabrication, farm, and home-shop cutting that benefits from spare wear parts and basic personal protection. An external air compressor, a suitable power circuit, and any additional task-specific PPE are still required. Bundle Highlights Full-Power 55A Cutting: On 240V, cut up to 9/16 inch clean and sever up to 7/8 inch. Consumables for Ongoing Work: Two 24-piece AG60 packs keep replacement wear parts close by. Basic Cutting Protection Included: The helmet and gloves add basic eye, face, and hand coverage. One Purchase, Fewer Add-Ons: Bundle the cutter, consumables, helmet, and gloves in one order. What's included? Included Item Purpose CUT55 Prolux Plasma Cutter Provides 20–55A cutting output on 240V and 20–35A output on 120V. AG-60 Cutting Torch And Accessories Directs the plasma arc and compressed air to cut electrically conductive metal. 10 ft Ground Clamp Completes the cutting circuit by connecting the workpiece to the plasma cutter. 10 ft Gas Hose Connects the cutter to a compatible source of clean, dry compressed air. Hose Clamp Secures the supplied gas hose at its connection point. 120V/240V Power Adapter Allows connection to a compatible 120V circuit when 240V power is unavailable. Shoulder Strap Makes the 11.88-pound cutter easier to carry between work areas. Dust Cover Helps keep dust and shop debris off the machine during storage. User Manual Provides setup, operating, maintenance, and safety instructions for the CUT55 Prolux. Air Compressor Filter Helps remove moisture and contaminants from incoming compressed air before it reaches the torch. 2 × AG60 Consumables Packs, 24 Pieces Each Keeps additional AG60 wear parts on hand, reducing delays when electrodes, nozzles, or related consumables need replacement. Welding Helmet — Random Color Provides eye and face shielding when properly adjusted for plasma cutting and used according to the manufacturer’s instructions. Welding Gloves Help protect hands from sparks, hot surfaces, and sharp metal edges during properly performed plasma-cutting work. CUT55 Prolux Technical Specifications Specification Product Information Model CUT55 Prolux Product Type Dual-Voltage, App-Controlled Non-Touch Pilot Arc Plasma Cutter Input Voltage 120V / 240V AC, Single Phase, 50/60 Hz Maximum Output 35A on 120V; 55A on 240V Output Current Range 20–35A on 120V; 20–55A on 240V Rated Input Capacity 5.5 kVA on 120V; 9.2 kVA on 240V Cutting Modes Standard Plasma Cutting, Grid/Mesh Cutting, and Rust Removal Mode Clean Cut Up to 3/8 in. on 120V; up to 9/16 in. on 240V Maximum Severance Up to 1/2 in. on 120V; up to 7/8 in. on 240V Arc Starting Method Non-Touch Pilot Arc Supported Materials Carbon Steel, Stainless Steel, Galvanized Steel, Cast Iron, Aluminum, Copper, and Other Conductive Metals Torch And Consumables AG60 Cutting Torch and AG60-Compatible Consumables App Control Bluetooth App Control for Current, 2T/4T Mode, Pilot-Arc Delay, and Post-Flow Settings Trigger Modes 2T / 4T Pilot-Arc Delay Adjustable From 2–10 Seconds Post-Flow Time Adjustable From 5–15 Seconds Operating Air Pressure 30–50 PSI on 120V; 50–75 PSI on 240V Minimum Air Supply 60 PSI and 4–5 CFM of Clean, Dry Air Recommended Compressor 20-Gallon or Larger Tank at 90 PSI for Sustained Cutting Air Inlet 1/4 in. NPT Fast-Connect Inlet Air Pressure Monitoring Real-Time Pressure Display with High- and Low-Pressure Alerts Duty Cycle 60% No-Load Voltage 330V Power Factor 0.7 Cooling System Air-Cooled Protection Features Air-Pressure Monitoring, High/Low-Pressure Alerts, and IP21S Enclosure Efficiency 85% Insulation Class Class H Weight 11.88 lb CNC Compatible Not Listed as CNC-Compatible Warranty 3 Years