IN600 Bosch EV14 Fuel Injector Set Bosch EV14 Honda JDM H23A-V Euro-R F20B

***Special order only, 2-3 day delay to to cut inlets, will NOT fit normal B/D/H/F intakes*** Flowrate at 43.5psi: 700cc Gasoline, 630cc N-Heptane Quantity: Four (4) Type: Bosch EV14 Length o-ring to o-ring: 48mm (long) Inlet diameter: 11mm (small) Warning: Choose the SHORT options for JDM H23A-VTEC, JDM F20B, JDM F23A, Euro-R, and B20Z that use shorter AP1-style injectors (65mm length). ***THESE WILL NOT WORK FOR A NORMAL H22, B16, B17, B18, D15, D16, F22, F23A intakes*** Connector: your choice of EV6 clips, wireless USCAR to OBD0/OBD1 adapters, or wireless USCAR to OBD2 adapters The IN600 fuel injector uses a 16-hole atomizer plate to create two spray cones spread apart at a 20 degree angle. Each cone is 17 degrees wide. Each injector will come with new inlet o-rings. Compare to RDX injectors: both have a split spray pattern, IN600's are 54% larger (630cc vs 410cc), IN600's are $10-50 cheaper with plug & play adapters, and IN600's are matched while RDX matching consists of pulling them out of a bulk container! NOTE1: For proper spray angling, set the connectors straight up or down. The cones will then spray to the sides at each valve stem. They will work in other positions, but not as efficiently.