Lamelune Alabaster Stacked Bar Wall Sconce

Alabaster wall sconce · single or set of two LameluneTwo bars of stone that float on the wall. Two long bars of natural alabaster sit one above the other at a slight offset, held at one end by a curved half-moon brass mount. Switched on, both bars glow warm from within. 19.1″Wide · 48.5 cm 4.7″Tall · 12 cm 3000KLED included 6.6 lb3 kg See it litWhere to mount it Set of 2Lit Full specificationsSlim, long and close to the wall. One size, one finish, sold singly or as a set of two. Switch the units to see the drawing in inches or centimeters. incm W 19.1 inW 48.5 cmH 4.7 inH 12 cmUpper barLower bar, offsetHalf-moon brass mount Size Width 19.1 in48.5 cm Height 4.7 in12 cm Weight 6.6 lb3 kg Light Light source Integrated LED, included Color temperature 3000K warm white Glow Both bars glow along their full length Build Shade Two natural alabaster bars, diagonally stacked Mount Half-moon backplate, brass Finish Gold + White Options Single or set of 2 Power and install Switch Push-button; also works with a wall switch Wiring Hardwired Voltage 110V–240V Use Indoor only Off and onPale stone by day, a low glow at night. Lights onLights off 01 Lit from within The integrated 3000K LED warms both bars from inside, so the whole length of stone glows. 02 Veining that drifts Cloud-like veining shows through the light and drifts along each bar. 03 A soft wash on the wall Light spills from the stone onto the wall around it in a soft, low wash. LitUnlit The half-moon mountOne brass curve holds it all. A single curved half-moon backplate in brushed brass holds both bars at one end, so the rest of the stone floats free of the wall. Brushed brassA soft gold finish that picks up the amber in the veining. Two neat screwsFixed with two small brass screws, the only hardware you see. Stacked, offsetThe lower bar steps in from the upper one, so the pair reads as a slim sculpture. Solid, flat wallAt 6.6 lb (3 kg), mount it on a solid, flat wall that can hold its weight. 1 ft2 ft3 ft4 ft5 ft6 ft7 ft8 ft5 ft 9 in · 175 cmMount at 59–67 in · 150–170 cm Where to mount itAt eye level, wherever it goes. BedsideConsoleHallway Beside the bed A pair, one each sideMount one above each nightstand, at the same height, so the glow lands at pillow level without a lamp on the table. Mount height59–67 in150–170 cm Sconce size19.1 × 4.7 in48.5 × 12 cm Above a console Single, centeredCenter one sconce over a console or sideboard and the art below it; the long bar echoes the length of the furniture. Mount height59–67 in150–170 cm Sconce size19.1 × 4.7 in48.5 × 12 cm Down a hallway A row along the wallRepeat along a hallway at one height for a calm line of light that never sticks out into the walkway. Mount height59–67 in150–170 cm Sconce size19.1 × 4.7 in48.5 × 12 cm Mount it on a solid, flat wall that can hold 6.6 lb (3 kg). Keep it away from water, high humidity and heat sources. In the roomOver art, beside a mirror. The slim horizontal profile brings a calm, sculptural accent to bedrooms, hallways and living rooms. SingleAbove the mantel art One bar of light over a painting, with the stone echoing the pale wall. Set of 2Over a dressing table A pair above two mirrors gives an even, warm light at the vanity. Single or set of two One sconceCentered over a console, a painting or a hallway wall. A set of twoEither side of a bed or above two mirrors, mounted at the same height. Natural alabasterCut from stone, bar by bar. Because each bar is cut from natural stone, the veining varies from piece to piece, so your sconce will be its own. From the yard Natural alabaster starts as rough blocks and slabs in the stone yard. Raw and translucent Pale and cloud-veined, the raw stone already lets light pass through. Cut to length Pieces are cut and shaped into long, slim bars before they meet the brass mount. CareA dry touch keeps it bright. Alabaster is a soft, porous stone, so it needs only a little care to keep its glow even. 01Switch off first Turn the light off and let the stone cool before you clean. 02Dust it dry Use a soft, dry microfiber cloth or a soft brush along the bars. 03Skip water and sprays Keep water, cleaners and high humidity away from the stone. 04Brass, dry cloth only Wipe the mount with a dry cloth; skip metal polish so the brushed finish stays even. FAQBefore it goes on the wall. Size19.1 × 4.7 in Weight6.6 lb / 3 kg LightLED, 3000K, included Mount at59–67 in OptionsSingle / set of 2 Is the light included?Yes. Lamelune has an integrated LED that comes with the sconce, in 3000K warm white, so there are no bulbs to buy.How big is it, and how heavy?It measures 19.1 in (48.5 cm) wide and 4.7 in (12 cm) tall, and weighs 6.6 lb (3 kg).How high should I mount it?Mount it about 59–67 in (150–170 cm) from the floor, on a solid, flat wall that can hold its weight.How do I turn it on, and is it hardwired?It has a push-button switch and also works with a wall switch. It is hardwired and runs on 110V–240V.Can I use it in a bathroom?No. It is for indoor use only; keep it away from water, high humidity and heat sources.Is the alabaster real, and will mine match the photos?Yes, each bar is cut from natural stone, so the veining varies from piece to piece and yours will have its own pattern.