OVONIC Roam Series 22.2V 6000mAh 150C 6S Softcase LiPo Battery Pack with XT90-S Anti-Spark or XT60 Plug Options for 7–10 Inch FPV Cinelifters, Long-Range Drones & RC Helicopters

Overview Cinematic FPV builds, heavy-lift cinelifters, X-Class racing multirotors, and large-scale RC aircraft demand sustained high-voltage output without compromising throttle responsiveness or payload agility. High-capacity 6S setups can also generate intense electrical arcing (sparks) during plug-in, which causes connector pitting and risks damaging sensitive flight controllers and ESCs over time. OVONIC Roam Series 22.2V 6000mAh 150C 6S Softcase LiPo Battery Pack is engineered specifically for long-range FPV exploration and high-payload aerial filming. Utilizing premium LiCoO2 cell chemistry and automatic stacking technology, this pack delivers a high 150C continuous discharge rate (300C peak burst) to eliminate throttle sag under heavy load. To ensure maximum versatility across various drone setups and ESC configurations, this battery is available with two main discharge plug options: an integrated XT90-S anti-spark connector (which suppresses high-voltage power surges and connector wear) or a standard high-temp XT60 connector for lighter builds. Supplying a generous 6000mAh capacity (133.2Wh) at an optimized weight of 761g, it provides the ideal power-to-weight balance for long flights. Primary Applications & Compatibility Requires a 6S (22.2V) power setup using an XT90-S / XT90 or XT60 connector and a battery mounting space accommodating 138 × 45 × 59 mm: 7-Inch to 10-Inch Long-Range FPV Drones & Cinelifters: Ideal for heavy-lift multirotors and cinematic setups including the GEPRC MARK4, MK5D-LR7, MARK4 LR8, MARK4 LR10, iFlight Helion 10 O3, Proxima 6 Cinelifter, Centurion X8, and Taurus X8 V3. 10-Inch X-Class Multirotors & Aerial Mapping Platforms: Delivers steady voltage curves and high energy density for long-duration mapping missions and endurance flights. RC Helicopters, EDF Jets & Aerobatic Planes: Fits 700mm–800mm RC helicopters, 80mm–90mm FMS EDF jets, and large 3D airplanes requiring high continuous discharge current. 1/7 & 1/8 Scale RC Speed-Run & Off-Road Vehicles: Provides high-amperage current delivery for high-speed surface platforms from ARRMA and Traxxas. Key Features Dual Connector Options (XT90-S / XT60): Choose between the XT90-S Anti-Spark plug (prevents spark erosion on high-voltage connections) or the standard XT60 plug to match your ESC setup directly without adapters. Massive 150C Discharge Power (300C Burst): Premium LiCoO2 chemistry delivers punchy, instant acceleration for aggressive climbs and recovery maneuvers with heavy cinema camera payloads. Automatic Cell Stacking Technology: Precision cell stacking ensures low internal resistance, matched discharge curves, and cell voltage consistency across all 6 cells throughout the entire discharge cycle. Optimized Power-to-Weight Ratio: Weighs just 761g, striking the perfect balance between extended flight endurance and multirotor agility for 7-10 inch frames. Durable High-Density Softcase: Built with a fire-retardant outer wrap and high-density softcase design for maximum structural integrity during transport and hard landings. Specification Brand: OVONIC (Roam Series) Battery Type: Lithium Polymer (LiPo) Cell Configuration: 22.2V / 6S1P / 6 Cells Capacity: 6000mAh Nominal Voltage: 22.2V Discharge Rate: 150C Continuous (300C Peak Burst) Total Energy: 133.2Wh Main Connector Options: XT90-S Anti-Spark Plug OR XT60 Plug (Select at checkout) Balance Connector: JST-XHR-7P Case Type: High-Density Softcase Dimensions: 138 × 45 × 59 mm (±5mm variance) | 5.43 × 1.77 × 2.32 in Net Weight: 761 g (±20g variance) | 1.68 lbs Package Quantity: 1-Pack What's in the Box 1 × OVONIC Roam Series 22.2V 6000mAh 150C 6S Softcase LiPo Battery (with XT90-S or XT60 Plug, based on selection) 2 × OVONIC Brand Stickers 1 × Technical User Manual Safety & Operating Guidelines Pre-Flight Voltage & Plug Check: Ensure your ESC, flight controller, and motor specifications support 22.2V (6S) input. Verify connector polarity before connecting. Balanced Charging Practices: Always use a dedicated LiPo balance charger set specifically to 6S balance mode. Cease charging immediately once each cell reaches 4.20V. ESC Cutoff Calibration: Set your ESC Low-Voltage Cutoff (LVC) to no lower than 3.4V to 3.5V per cell (20.4V–21.0V total pack voltage) to avoid over-discharging damage. Softcase Care & Strap Placement: Secure the battery using non-slip battery straps and protective silicone pads. Inspect the outer wrap before every flight for frame rub marks or puncture damage. Storage Protocol: For storage exceeding 48 hours, discharge or charge the battery to storage level (3.80V–3.85V per cell) and store in a cool, dry place inside a fire-resistant LiPo safe bag.