Canplas Endura 25 gpm Grease Interceptor - 3925XTA03

Canplas Endura 3925XTA03 25 GPM Grease Interceptor with 3" Connections Brand: Canplas / Endura SKU: 3925XTA03 Product Overview The Canplas Endura 3925XTA03 is a 25 GPM hydromechanical grease interceptor designed for commercial and institutional foodservice plumbing systems that need reliable fats, oils, and grease separation. Built from corrosion-resistant high-impact polypropylene, this Endura 25XT model features 3" no-hub mechanical joint connections, 29.5 gallon liquid capacity, 50 lb minimum grease capacity, 73.01 lb actual grease capacity, and 97.3% average efficiency per ASME A112.14.3 testing. It is designed for practical installation, service access, and long-term grease management in restaurants, cafés, commercial kitchens, food prep areas, and similar facilities. Key Features: 25 GPM Flow Rating: Designed for hydromechanical grease interception applications requiring a 25 GPM rated unit. 3" Mechanical Joint Connections: 3925XTA03 configuration includes 3" no-hub mechanical joint connection size. 50 lb Minimum Grease Capacity: Meets the industry minimum grease capacity based on 25 GPM flow rating. 73.01 lb Actual Grease Capacity: Canplas lists actual grease capacity at breakdown as 73.01 lb / 33.11 kg. 97.3% Average Efficiency: Average efficiency listed by Canplas per ASME A112.14.3 testing. 29.5 Gallon Liquid Capacity: Liquid capacity listed at 29.5 gallons / 111.67 L. High-Impact Polypropylene Construction: Body, lid, and internal components are made from corrosion-resistant polypropylene that will not rust, chip, or peel. 220°F Temperature Capability: Designed to withstand operating temperatures up to 220°F / 104°C. Flow Control Included: Supplied with a flow control device with integrated air intake for external flow control installations. Quick Access Lid: Lid design supports service access for inspection, cleaning, and maintenance. 300 lb Cover Load Rating: Cover load rating listed at 300 lb / 135 kg per CSA B481.0 proof load for approval. Removable Internal Components: Internal features are removable or accessible to support easier cleaning and maintenance. Technical Specifications: Model: Endura 25XT Part Number: 3925XTA03 Product Type: Hydromechanical Grease Interceptor Brand: Canplas / Endura Flow Rate: 25 GPM / 1.6 L/sec Connection Size: 3" Connection Type: No-hub mechanical joint connection Minimum Grease Capacity: 50 lb / 22.68 kg Actual Grease Capacity: 73.01 lb / 33.11 kg Average Efficiency: 97.3% per ASME A112.14.3 Liquid Capacity: 29.5 gal / 111.67 L Operating Temperature Capability: 220°F / 104°C Cover Load Rating: 300 lb / 135 kg per CSA B481.0 proof load for approval Unit Weight Empty: 37.77 lb / 17.136 kg Material: Corrosion-resistant high-impact polypropylene compound Included Flow Control: Flow control device with integrated air intake Standards & Listings: Certified to ASME A112.14.3, PDI-G101, or CSA B481.1, with UPC or CSA listing where applicable Package Includes: Endura 25XT Grease Interceptor: 25 GPM grease interceptor body with 3" mechanical joint connections. Quick Access Cover: Cover rated to support the listed 300 lb CSA B481.0 proof load. Internal Baffles / Components: Removable or accessible internal features for grease separation and cleaning access. Flow Control Device: Flow control device with integrated air intake for external flow control installations. Installation Supplies Not Included: Pipe, no-hub couplings, venting materials, cleanouts, risers, solids interceptor, supports, sealants, and code-required accessories are sold separately unless included by the supplier. Applications: Commercial Kitchens: Helps separate fats, oils, and grease from wastewater before it enters the drainage system. Restaurants & Cafés: Practical grease management for food prep sinks, pot sinks, rinse stations, and dishwashing areas where local code allows. Institutional Foodservice: Suitable for schools, churches, cafeterias, healthcare facilities, and similar foodservice operations. Food Prep Areas: Helps protect plumbing systems from grease accumulation in compatible commercial food prep layouts. Service & Maintenance Retrofits: Useful when replacing corroded or undersized grease interceptors where sizing and code requirements match. On-Floor, In-Floor, or Semi-Recessed Installations: Endura technical guidance supports flexible installation approaches when installed according to manufacturer instructions and local code. Installation & Use Notes: Code Compliance Required: Grease interceptor sizing, installation location, venting, cleanouts, and discharge connections must comply with local plumbing code and authority having jurisdiction requirements. Confirm Sizing: Verify 25 GPM flow rating, 3" connection size, fixture load, pipe layout, and required grease capacity before installation. Use Included Flow Control: Install the supplied flow control device with integrated air intake according to Canplas / Endura instructions for external flow control installations. Vent Properly: Follow manufacturer instructions and plumbing code for venting and air intake requirements to maintain proper interceptor performance. Solids Management: Canplas recommends using a solids interceptor where food solids or food grinder discharge may enter the drain line. Excess solids can reduce performance and increase maintenance frequency. Dishwasher Note: If local code allows dishwasher discharge into the interceptor, follow Canplas guidance because high temperature water, detergents, and discharge conditions can affect grease separation performance. Temperature Limit: Do not exceed the listed 220°F / 104°C operating temperature capability. Access for Cleaning: Install with adequate service clearance so the cover and internal components can be removed for inspection, cleaning, and maintenance. Routine Maintenance: Grease interceptors require regular inspection and cleaning. Maintenance frequency depends on kitchen volume, grease load, solids load, and local requirements. Load Rating: Cover is listed for a 300 lb CSA B481.0 proof load. Do not install in vehicle traffic areas or locations exceeding the listed load rating unless approved protective installation methods are used. Pressure Testing Warning: Canplas cautions against testing plumbing systems through Endura grease interceptors with compressed air or compressed water, as doing so may void warranty for products used that way. Professional Installation: Installation should be completed by a qualified plumbing professional familiar with grease interceptor sizing, venting, drainage, and local foodservice plumbing requirements. Frequently Asked Questions What is the Canplas 3925XTA03? The Canplas 3925XTA03 is an Endura 25XT hydromechanical grease interceptor rated for 25 GPM with 3" mechanical joint connections. What flow rate is this grease interceptor rated for? Canplas lists the 3925XTA03 at 25 GPM / 1.6 L/sec. What connection size does 3925XTA03 use? The 3925XTA03 model uses 3" mechanical joint connections. What is the minimum grease capacity? Canplas lists minimum grease capacity at 50 lb / 22.68 kg. What is the actual grease capacity? Canplas lists actual grease capacity at 73.01 lb / 33.11 kg. What is the liquid capacity? Canplas lists liquid capacity at 29.5 gallons / 111.67 liters. What is the average efficiency? Canplas lists average efficiency at 97.3% per ASME A112.14.3 testing. What material is it made from? The body, lid, and internal components are made from corrosion-resistant high-impact polypropylene compound. What temperature can it handle? Canplas lists operating temperature capability at 220°F / 104°C. Does it include flow control? Yes. Canplas states a flow control device with integrated air intake is provided with the interceptor for external flow control type installations. What is the empty unit weight? Canplas lists the 3925XTA03 empty unit weight at 37.77 lb / 17.136 kg. Can this be installed below grade? Endura documentation allows risers for below-grade installations of 15–50 GPM interceptors to be extended to grade up to a maximum of 18", when installed according to manufacturer instructions and code requirements. Is this for commercial foodservice use? Yes. Endura hydromechanical grease interceptors are designed for commercial and institutional foodservice grease management applications where sizing and code requirements match. Why We Like It: The Canplas Endura 3925XTA03 is a solid option for commercial kitchen grease management when a 25 GPM interceptor with 3" connections is required. The corrosion-resistant polypropylene construction, 73.01 lb actual grease capacity, 97.3% average efficiency, 29.5 gallon liquid capacity, 220°F operating temperature capability, included flow control with air intake, quick service access, and lightweight 37.77 lb empty weight make it easier to handle, install, and maintain than many traditional metal interceptors.