SPM26-12 Adjustable Pole Mount Solar Rack Kit For 8, 10, or 12 Panels - Poles Included

SPM26-12 Adjustable Pole Mount Solar Rack Kit For 8, 10, or 12 Panels - Poles Included SKU: SPM26-12 The SPM26-12 Adjustable Pole Mount Solar Rack Kit provides a durable ground-mounted option for cabins, off-grid homes and remote sites. The system uses a steel pole-mounted structure with Pegasus Solar aluminum rails and Multi-Clamps. The adjustable strut allows the array angle to be manually changed for seasonal optimization. Bedrock plate is not included. To include, please see link here. FEATURES Available for 8, 10 or 12 panels Panels install in landscape orientation, 2 modules wide Pegasus Solar aluminum rails and structural splices Multi-Clamps compatible with 30 to 40 mm panel frames Adjustable tilt using the telescopic support strut Steel pole and structural support system Designed for installation in a poured concrete footing STRUCTURE AND MATERIALS Steel pole-mounted support structure Steel structural rails Pegasus aluminum panel rails Pegasus Multi-Clamps and rail hardware Adjustable diagonal brace and telescopic support strut FOUNDATION AND INSTALLATION REQUIREMENTS Concrete: 25 MPa or 30 MPa Sonotube-style foundation form Compacted base over undisturbed soil Pole should be checked for plumb in two directions Brace the pole in place while the concrete sets Allow at least 24 hours before continuing installation PANEL CONFIGURATIONS 8 panels: 2 × 4 landscape 10 panels: 2 × 5 landscape 12 panels: 2 × 6 landscape The 12-panel configuration is designed around modules approximately 77.2” × 44.65”. Confirm panel dimensions and clamping requirements before installation. INCLUDES Adjustable pole mount structure Steel pole and support components Pegasus Solar rails Rail splices Multi-Clamps WARRANTY Racking and structure: 10-year limited warranty on rack and pole components NOTES Solar panels not included Multi-Clamps are designed for compatible 30 to 40 mm panel frames Foundation sizing should follow local soil and building requirements Installation should follow the supplied installation instructions and applicable local codes Bedrock mounting plate not included in the stand-alone kit Specs Model: PM-81012 Depth Adjustments: Increase hole depth by about 6 in for every 12 in of pole height beyond table values used in your design Embed Depth: Approximately 72 in of pole below grade in concrete Panel Capacity: Configurable for 8, 10 or 12 solar modules Clamps and hardware: Pegasus Multi Clamps and required mounting hardware Weight: 700 lb Mount Type: Adjustable pole mount Panel Capacity: 8, 10 or 12 panels Panel Orientation: Landscape Array Layout: 2 panels wide 8-Panel Configuration: 2 × 4 10-Panel Configuration: 2 × 5 12-Panel Configuration: 2 × 6 Approx. Array Height, 8 Panels: 15’1” Approx. Array Height, 10 Panels: 18’10” Approx. Array Height, 12 Panels: 22’7” Compatible Panel Frame Thickness: 30 to 40 mm Rail System: Pegasus Solar aluminum rails Structural Rail Splices: Pegasus bonded structural splices Main Structure: Steel Mounting Structure: Single-column pole support Tilt Adjustment: Manual telescopic strut adjustment Foundation Type: Concrete footing Recommended Concrete Strength: 25 MPa or 30 MPa Foundation Form: Sonotube Minimum Initial Concrete Set Time: 24 hours Reference Module Size: Approx. 77.2” × 44.65” Reference 12-Panel Layout: 2 wide × 6 high Clamp Type: Pegasus Multi-Clamp MLPE Mounting: Pegasus MLPE mounts Bonding: BondBox and north-south bonding jumper Structural Fasteners: M8 through M18 hot-dip galvanized bolts Warranty: 10-year limited warranty on rack and pole components Installation Manual