BOSS StrongBox Top Loader (14W x 37D x 10H)

Universal-fit top-loading vehicle safe with a 14"W x 37"D x 10"H footprint — long and narrow to run along the edge of a trunk, cargo area, or truck bed. 2.9 cubic feet of secured storage — fits long guns, pistols, mags, laptops, weapon accessories, and gear. Constructed from 16-gauge cold-rolled steel with a double-layered 14-gauge steel lid. Medeco high-security lock with shielded 10-gauge locking cam to prevent tampering and pry attacks. Gas strut assists lid opening; reinforced heavy-duty steel hinge for daily use. Foam-lined interior in a wrinkled-black powder-coat finish. Made in America with a Lifetime Guarantee. Jump To: Why Choose the 7126-7530 Top Loader? Key Features Specifications What's Included Installation About BOSS StrongBox Frequently Asked Questions Why Choose the 7126-7530 Top Loader? The BOSS StrongBox 7126-7530 Top Loader is one of Boss's most popular universal-fit boxes because the 14 x 37 footprint runs cleanly along the side of a sedan trunk, an SUV cargo floor, or a truck bed while leaving the rest of the space open for other gear. Built to the same law-enforcement specification Boss supplies to federal fleets, the double-layered lid, shielded Medeco lock cam, and 16-gauge steel body give you serious hardened storage without the bulk of a full safe. If you're carrying long guns, sensitive tools, or valuables on a regular basis, this is the workhorse. Key Features Medeco high-security lock One Medeco high-security lock with a 10-gauge shielded cam. The cam is fully guarded to prevent pry, tamper, and cutting attacks. Double-layered steel lid Outer 14-gauge cold-rolled steel over a 16-gauge steel body with (2) 16-gauge lock guards shielding the locking cam from the inside. 2.9 cubic feet of storage Long, narrow footprint fits full-size long guns, range gear, laptops, and weapon accessories. Gas strut lid assist 40-lb. gas strut opens the lid smoothly and holds it open hands-free. Heavy-duty reinforced hinge 16-gauge steel hinge with a 0.120" pin, 1.50" open width, and 0.50" knuckles — built for daily open-and-close cycles. Powder-coated finish Powdered epoxy coating in wrinkled black — durable finish that hides scuffs and resists corrosion. Specifications Outside Dimensions 14"W x 37"D x 10"H Inside Dimensions 12.75"W x 36"D x 8.75"H Storage Capacity 2.9 cubic feet Weight 45 lbs. Body Construction 16-gauge cold-rolled steel Outer Lid 14-gauge cold-rolled steel Inner Lid (2) 16-gauge cold-rolled steel lock guards shielding (2) 10-gauge high-security locking cams Lock (1) Medeco high-security lock Locking Cam (1) 10-gauge high-security cam through inner-lid slot into enclosure slots Enclosure Locking Slots (2) obround slots for the lock cam Gas Strut (1) 40-lb. force Hinge 16-gauge CRS, 1.50" open width, 0.120" pin, #6 screw, 2.00" leaf holes, 0.50" knuckles Finish Powdered epoxy — wrinkled black Interior Foam-lined Mounting Bottom mounting holes with mounting hardware included Country of Origin Made in America Warranty Lifetime Guarantee What's Included (1) BOSS StrongBox 7126-7530 Top Loader (1) Medeco high-security lock with (2) keys (1) 40-lb. gas strut (installed) Bottom mounting hardware Foam liner (pre-installed) Installation The 7126-7530 uses factory-drilled bottom mounting holes and includes mounting hardware for a permanent install to your vehicle floor, truck bed, or cargo platform. For a semi-permanent option, the optional Heavy Duty Cable and Clamp (sold separately) anchors the box to a vehicle tie-down without drilling. Position the box against the side wall of a trunk or cargo area for the cleanest footprint, and confirm the 14 x 37 dimensions clear your specific vehicle before drilling. About BOSS StrongBox BOSS StrongBox has been designing and manufacturing vehicle security boxes for Law Enforcement and Federal Government agencies for more than a decade. Every StrongBox is built in America from cold-rolled steel with Medeco high-security or equivalent locks, shielded locking cams, and pry-resistant latching systems — the same construction Boss ships to duty fleets is what you get in every consumer product. Boss backs every box with a Lifetime Guarantee against manufacturing defects. If you have a fitment question or need help selecting the right box for your vehicle, our team is here to help. Frequently Asked Questions Will this fit in my vehicle?The 7126-7530 has a 14"W x 37"D footprint. It fits the trunks of most full-size sedans, the cargo floor of mid- and full-size SUVs (Ford Interceptor Utility, Explorer, Edge, Escape, Chevy Tahoe/Silverado/Suburban, GMC Yukon/Sierra 1500/Terrain, Dodge Durango/RAM 1500, Toyota 4Runner/Tacoma/Tundra, Jeep Wrangler/JK/Cherokee), and truck beds with enough width. Always measure your specific vehicle before ordering. Can it be locked open for quick access?The 40-lb. gas strut holds the lid open hands-free while you access contents, but the lock itself secures the lid in the closed position — it is not a keep-open latching mechanism. What is the Medeco lock rated for?Medeco locks are UL-437 high-security rated and are widely used in commercial and government applications. The 7126-7530 pairs the Medeco cylinder with a 10-gauge shielded locking cam for pry resistance from both the outside and the inside. Can I mount it without drilling into my vehicle?Yes. The optional Heavy Duty Cable and Clamp accessory (sold separately) allows you to anchor the box to an existing vehicle tie-down or fixed point without drilling. For maximum security, permanent bolt-down through the bottom mounting holes is recommended.