Generac 7329 28kW Air-Cooled Whole Home Standby Generator

Features Financing options offer you solutions that meet your budget. Electronic fuel & ignition control optimizes fuel use for a more cost-efficient and lower emission back-up power solution.* *On average versus Generac Guardian Series standby generators. Long, best-in-class service intervals mean you spend less time on maintenance and more time enjoying the comfort that comes with owning a standby generator. Remote diagnostics monitor your generator’s performance and help detect issues before they become a problem, helping you save time & money on maintenance. Built-in Cellular Connectivity allows you to monitor performance and control your generator with Mobile Link whether you're home or away. Mobile LinkTM keeps you connected and provides real-time updates and maintenance alerts.* *Requires Mobile Link TM premium subscription Oil level sensors monitor oil level to help ensure generator readiness. Improved cold start performance enables generator start-up in cold climates. Sloped roof and rear air intake reduce risk of snow and ice intrusion. Compatible with ecobee by Generac thermostats and Generac PWRcell battery systems to seamlessly monitor & control your home’s energy. The automatic transfer switch comes equipped with built-in whole home surge protection, helping shield your appliances and electronics from damaging power surges. Every Generac Standby Generator comes with a 5-year limited warranty, and over 65 years of innovation behind it. 24/7/365 Customer Support Team is ready all day, every day, from our headquarters in Wisconsin to answer any questions you might have. Generac generators and engines are engineered and assembled in the USA*. What's in The Box 28kW Generac Air Cooled Standby Generator Automatic Transfer Switch Warranty 5 Year Limited Warranty 30 Day Satisfaction Gauranteed Specifications SKU GNC-7329 Model 28 kW Rated maximum continuous power capacity (LP) 28 kW* Rated maximum continuous power capacity (NG) 25 kW* Rated voltage 240 V Rated maximum continuous load current – 240 Volts (LP / NG) 116 / 104 Total Harmonic Distortion Less than 5% Main line circuit breaker 125 amp Phase 1 Number of rotor poles 2 Rated AC frequency 60 Hz Power factor 1.0 Battery requirement (not included) 12 volts, AGM Powersport Battery Group BTX20L 310CCA minimum Dimensions (L x W x H) in / cm 46.4 x 26.3 x 30.7 / 117.9 x 66.8 x 77.9 Sound output at 23 ft (normal load) 67 dB(A) Sound output at 23 ft (Quiet-Test mode) 55 dB(A) Engine type GENERAC G-Force 1000 Series Displacement 997 cc Fuel consumption Natural Gas 1/2 Load 182 ft³/hr (5.15 m³/hr) Fuel consumption Natural Gas Full Load 297 ft³/hr (8.41 m³/hr) Fuel consumption Liquid Propane 1/2 Load 81 ft³/hr (2.23 gal/hr) [8.45 L/hr] Fuel consumption Liquid Propane Full Load 144 ft³/hr (3.97 gal/hr) [15.02 L/hr] Controls AUTO Automatic start on utility failure; programmable exerciser Controls MANUAL Start with starter control; unit stays on; transfers to load if utility fails Controls OFF Stops unit; generator will not automatically start on utility failure; control and charger operate if utility is available Controls SERVICE For diagnostic personnel use to prevent remote commands and nuisance Mobile Link notifications during testing Ready to Run/Maintenance messages Standard Engine Run Hours indication Standard Programmable start delay 2–1,500 seconds (dealer programmable) Utility nominal voltage setting Adjustable 90–110% of 240V (default 100%) Utility Voltage Loss/Return to Utility (brownout setting) Adjustable 75–80% dropout / 84–89% pickup Future Set Capable Exerciser/Exercise Set Error warning Standard Run/Alarm/Maintenance logs 50 events each Engine start sequence Cyclic cranking; engine cranks a maximum of five times at factory set intervals and durations Starter lock-out Starter cannot re-engage until 5 sec after engine has stopped Smart battery charger Standard Charger Fault/Missing AC warning Standard Low Battery/Battery Problem Protection and Battery Condition indication Standard Automatic Voltage Regulation with Over and Under Voltage protection Standard Under-Frequency/Overload/Stepper Overcurrent protection Standard Safety Fused/Fuse Problem protection Standard Automatic Low Oil Pressure/High Oil Temperature shutdown Standard Overcrank/Overspeed (@ 72 Hz)/RPM Sense Loss shutdown Standard High Engine Temperature shutdown Standard Internal Fault/Incorrect Wiring protection Standard Common external fault capability Standard Automatically upgradable firmware via Cellular or Wi-Fi Standard