Fleece Performance Cold Weather Heater Kit For 2007.5-2024 Ram 6.7L Cummins

Add proven cold-weather startability to your Fleece Performance intake and grid heater kit. This add-on cold weather kit for the 6.7L Cummins delivers proven engine startability down to -35°C through an optimized secondary 700W heating element.Optimized heater design and placement in the intake air stream deliver the most efficient heating possible. Compared with other grid heating kits on the market, the Fleece Performance kit achieves the same cold-temperature startability at lower wattage and with less strain on your grid heater relay. Installs in about 30 minutes with only an 8mm socket. Features: Add-on secondary 700W coil heating element Proven engine startability down to -35°C (dual-heater configuration) Optimized heater design and placement in the intake air stream Lower wattage and less grid heater relay strain than competing kits High-flex heater power cable included Approximately 30-minute install — only an 8mm socket required Specifications: Brand: Fleece Performance Part Number: FPE-CUMM-IAH-X2 Heating Element: Secondary 700W coil Cold Startability: Down to -35°C (dual-heater configuration) Install Time: Approximately 30 minutes Tools Required: 8mm socket Requires: Fleece Performance Intake & Grid Heater Kit (FPE-CUMM-IHK-0724) installed Warranty: 1 Year Limited Parts Warranty Included: (1) 700W coil heater (1) Heater power cable (1) Heater crush washer (2) M5 lock nuts Fitment: 2007.5-2009 Dodge Ram 2500/3500 6.7L 24V Cummins 2010-2024 Ram 2500/3500 6.7L 24V Cummins 2007.5-2009 Dodge Ram 4500/5500 6.7L 24V Cummins (Cab & Chassis) 2010-2024 Ram 4500/5500 6.7L 24V Cummins (Cab & Chassis) Notes: 1 Year Limited Parts Warranty Requires the Fleece Performance Intake & Grid Heater Kit (FPE-CUMM-IHK-0724) to be installed Recommended for sustained temperatures below 23°F (-5°C) Dual-alternator trucks: only the rear heater port can be used — the front port requires the heater plug