FLIR ADK - IN STOCK

The FLIR ADK™ is a cost-effective way to develop the next generation of automotive thermal vision for advanced driver assistance systems (ADAS) and autonomous vehicles (AV). Thermal infrared cameras are the best sensor technology for pedestrian detection, reliably classifying people in cluttered environments and giving analytics the critical information needed for automated decision making. The ADK’s rugged, IP67 rated enclosure incorporates a heated window for all-weather driving. With the GMSL and USB interfaces, installation is plug-and-play easy. Note: Only GMSL1 cameras work with the Ethernet BoB See Clearly, Even in Challenging Lighting Conditions Thermal sensors create images from heat, not light, so they can detect pedestrians and oncoming vehicles regardless of lighting conditions. Next-Generation Thermal Vision is Plug-and-Play Easy Start collecting thermal data in minutes. Simple Interface Ports Data Directly into Analytics Easy set-up, operation, and integration. Specifications Overview Pixel Pitch: 12 µm Spectral Band: 8-14 microns (LWIR) Thermal Sensitivity: < 50 mK Weight: ~100 gm (3.5 oz) Camera Interface Options: USB, GMSL, Ethernet and FPD-link Data Format: Software-selectable: 16-bit TIFF (raw sensor format) or compressed 8-bit Environmental Environmental Protection: IP67 Environmental & Approvals Operating Temperature: -40°C to +85°C (-40°F to +185°F) Shock: 1,500 G @ 0.4 msec Imaging & Optical Array format: 640 × 512 Frame Rate: Full Frame (30 & 60 Hz selectable), 9 Hz optional Sensor Technology: Boson™ – Uncooled VOx microbolometer Solar protection: Yes (sun will not damage sensor) Physical Dimensions (W x H x D): 35 × 40 × 47 mm (1.38 × 1.57 × 1.8 in) Power Power Consumption: 1 W (without heater); ~4 W average and 12 W maximum (with heater) Power Requirements: Camera: 5 VDC (USB2) or 24 VDC (GMSL); Window Heater: 12 VDC (USB2) or 24 VDC (GMSL) Resources Datasheet User Manual Quick Start Guide GMSL driver for the NVIDIA Jetson AGX Xavier running JetPack4.3 Important Notes Removal of the camera from the housing will invalidate the warranty. All international customers that are ordering any Thermal Imaging Camera will be required to fill out an End Use Statement document before shipment. Once you place your order we will send you an email with the documents. All US orders will get 60Hz cameras unless you contact us (help@groupgets.com) Export Information ECCN 60/30Hz: 6A003.b.4.b ECCN 9Hz: 6A993.a HTSUS: 9013.80.9100 Country of Origin: USA 🕑Lead Time The ADK's if purchased on this page are in stock.