(Assembled) Fujikura 2026 Ventus TR Black VeloCore+ Driver Shaft with Adapter Tip + Grip

The Fujikura 2026 Ventus TR Black with VeloCore+ Driver Shaft comes fully assembled and ready to play with your choice of adapter and grip. Choose compatibility with Callaway, Cobra, TaylorMade, Titleist, Ping, Mizuno, PXG, or Wilson driver heads for a true plug-and-play upgrade. Simply attach it to your club and start swinging! Note: This shaft can be built for your fairway wood club too, just select the club type and adapter model when adding to Cart. ADAPTER TIP TO GRIP LENGTH (IMPORTANT: THIS IS NOT FINAL CLUB LENGTH) How to select the “ADAPTER TIP to GRIP Length”: This is determined by unscrewing the end cap, removing the club head, and measuring from the bottom of the adapter tip to the end of the grip - for more info: see how to measure "Adapter Tip to Grip" length. ** All measurements are specified in inches. If you have any questions on how to choose length, please contact us before ordering. NON-STANDARD RETURN/CANCELATION POLICY Assembled shafts and clubs cannot be returned. Once assembly has begun on your order, it cannot be canceled or modified. Please contact us with any questions before placing your order. INCLUDED WITH THIS ASSEMBLED SHAFT FUJIKURA 2026 Ventus TR Black with VeloCore+ Driver / Fairway Shaft assembled with choice of shaft adapter + grip Installed OEM compatible adapter - guaranteed fit with same OEM loft/lie adjustability Installed Grip - select from grip options, or add a grip separately to Cart Customized shaft "adapter tip to grip" length Customized grip tape options IMPORTANT: Club head not included See all terms and details for assembled shafts WHAT YOU NEED TO KNOW The Fujikura VENTUS TR Black with VeloCore+ is engineered for golfers seeking ultra-low launch, low spin, and maximum stability without sacrificing feel. Featuring Fujikura’s stiffest profile to date, along with a linear bend profile and ultra-low torque design, it delivers exceptional control and consistency for more aggressive swings. Enhanced with VeloCore+ technology, TR Black provides a smoother, more connected feel throughout the swing while maintaining the stability and responsiveness needed at higher swing speeds. Ideal for players looking for penetrating ball flight, tight dispersion, and controlled performance in both drivers and higher-lofted fairway woods. SPECIFICATIONS Model Flex Length Weight Tip Flex Butt Flex Torque Par. Tip Length Butt Diameter Bend Point Spin Launch TR Black+ 5 S 46 61 94 80 3.5 3.0 0.604 H L L X 46 61 90 74 3.3 3.0 0.606 H L L TR Black+ 6 S 46 69 87 72 3.1 3.0 0.602 H L L X 46 69 81 67 2.9 3.0 0.602 H L L TR Black+ 7 S 46 79 84 66 2.9 3.0 0.604 H L L X 46 79 79 62 2.7 3.0 0.604 H L L TR Black+ 8 X 46 87 78 60 2.6 3.0 0.606 H L L TR Black+ 9 X 46 97 75 57 2.5 3.0 0.620 H L L *Tip size = 0.335" Description Introducing the new 2026 VENTUS TR with upgraded VeloCore+ Technology. Built for more speed, more stability, and more control than ever before. TR was re-engineered through extensive Tour feedback and motion capture testing. This advanced new design with VeloCore+ Technology and Spread Tow fabric delivers even greater stability throughout the swing, smoother feel, and more speed through impact giving golfers a more powerful and connected swing experience. VELOCORE+ is the next generation of Fujikura’s ground-breaking proprietary technology. The technology is designed for ultimate clubhead stabilization and promotes consistent center-face contact, tightening dispersion and increasing control of the club throughout the swing. Featuring a re-engineered multi-material bias core, VELOCORE+ enhances the feel and performance of VENTUS with an additional premium bias core material, promoting even tighter dispersion and increased ball speeds. Fujikura Shaft Profile Guide The table below shows the stiffness profile across three sections — tip, mid, and handle — for each Fujikura shaft model. Tip stiffness most directly affects launch and spin. Handle stiffness influences feel and load during the swing. Model Tip Mid Handle 2024 Ventus (VeloCore+) Ultra-stiff Stiff Firm Ventus TR Red Stiff Stiff Ultra-stiff Ventus TR Blue Ultra-stiff Stiff Stiff Ventus TR Black Ultra-stiff Stiff Ultra-stiff Ventus Red Stiff Firm Ultra-stiff Ventus Blue Ultra-stiff Stiff Firm Ventus Black Ultra-stiff Stiff Stiff Speeder NX Blue Stiff Stiff Firm Speeder NX Green Stiff Stiff Stiff Motore X F1 Stiff Stiff Firm Motore X F3 Stiff Firm Medium Air Speeder 40 Medium Medium Soft Vista Pro Flighted line — refer to specs as profiles vary by weight and flex Profile stiffness scale from softest to firmest: Soft → Medium → Firm → Stiff → Ultra-stiff. Tip stiffness most directly influences launch angle and spin rate. A stiffer tip produces lower launch and lower spin. A softer tip produces higher launch and more spin. Fujikura Launch & Spin Chart Where each Fujikura shaft sits on the launch and spin spectrum. Lower launch and spin = more control and penetrating flight. Higher launch and spin = more carry distance and height. 2024 Ventus Blue (VeloCore+) Launch: Mid Spin: Low–mid Ventus Black (VeloCore) Launch: Low Spin: Low Ventus TR Black (VeloCore) Launch: Low Spin: Low Ventus TR Blue (VeloCore) Launch: Mid Spin: Low Ventus Blue (VeloCore) Launch: Mid Spin: Low–mid Speeder NX Blue Launch: Mid Spin: Low–mid Motore X F1 Launch: Low–mid Spin: Low–mid Speeder NX Green Launch: Mid–high Spin: Low–mid Ventus TR Red (VeloCore) Launch: Mid–high Spin: Low–mid Ventus Red (VeloCore) Launch: Mid–high Spin: Mid Motore X F3 Launch: High Spin: Low–mid Vista Pro (Flighted) Launch: High Spin: Mid–high The 2024 Ventus Blue with VeloCore+ maintains the same mid launch / low-mid spin position as the original Ventus Blue profile. Ventus Black and TR Black sit at the lowest launch and lowest spin in the entire Fujikura lineup.