0AM927769K Complete DQ200 Mechatronic Used

0AM927769K Complete DQ200 Mechatronic | Used OEM Used Complete DQ200 Mechatronic 0AM927769K Part Number: 0AM927769K OEM original complete DSG DQ200 mechatronic assembly with TCU/ECU and hydraulic block for Volkswagen Group vehicles Transmission Type DSG 7-Speed DQ200 (0AM) Condition Used Fully Functional Manufacturer TEMIC Origin Made in Romania Component Complete Mechatronics Unit Warranty 12 Months Tested & Verified Working Unit This used original complete DQ200 mechatronic unit is fully tested and prepared as a reliable OEM replacement. The assembly includes the TCU/ECU and hydraulic block and is supplied with a 12-month warranty. OEM Part Numbers Main OEM Part Number: 0AM927769K • 0AM 927 769 K Related Mechatronic / TCU Codes: 0AM927769D • 0AM927769E • 0AM927769F • 0AM927769G • 0AM927769K Related Hydraulic Block Codes: 0AM325025D • 0AM325025H • 0AM325025J • 0AM325025DX Related Valve Body Codes: 0AM325066 • 0AM325066AC • 0AM325066AE • 0AM325066R Always Verify Your Part Number Before placing an order, check the OEM number printed directly on your existing mechatronic unit and confirm it matches 0AM927769K. Related DQ200 mechatronic, hydraulic block and valve body codes may exist, but software version, hardware type, MQB / non-MQB platform and sensor configuration must be verified before replacement. Technical Specifications Transmission Type: DSG 7-Speed DQ200 (0AM) Component: Complete Mechatronic Unit (TCU / ECU + Hydraulic Block) Application: Volkswagen Group vehicles equipped with DQ200 / 0AM transmission Manufacturer: TEMIC Country of Manufacture: Romania OEM Number: 0AM927769K Hydraulic Block Family: 0AM325025D / 0AM325025H / 0AM325025J / 0AM325025DX Valve Body Family: 0AM325066 / 0AM325066AC / 0AM325066AE / 0AM325066R Part Condition: Used Tested & Verified Working Warranty Period: 12 Months Product Description This is a genuine used OEM complete DQ200 mechatronic unit with part number 0AM927769K. It is a critical electro-hydraulic transmission component used in the 7-speed DSG DQ200 gearbox, responsible for hydraulic pressure regulation, clutch and gear actuation, and communication with the vehicle electronics. What This Mechatronic Unit Does Controls hydraulic pressure inside the DSG gearbox Manages gear engagement and clutch operation Integrates the TCU / ECU with the hydraulic block and valve body Communicates with engine and transmission control systems Supports proper shifting performance and gearbox functionality Complete Assembly This listing is for a complete mechatronic unit including the electronic TCU/ECU, hydraulic block and valve body. Related code families may appear on labels under TCU number 0AM927769K, hydraulic block references 0AM325025... and valve body references 0AM325066.... Vehicle Compatibility The 0AM927769K mechatronic is intended for selected Volkswagen Group vehicles equipped with DSG DQ200 / 0AM transmission. Always verify the exact part number on your existing unit before ordering. Typical Applications Audi A1, A3, Q3 with DSG DQ200 / 0AM transmission Volkswagen Polo, Golf, Golf Plus, Jetta, Passat, Touran, Tiguan, Beetle, Bora, Scirocco, Sharan, Caddy with DSG DQ200 / 0AM transmission Škoda Fabia, Rapid, Roomster, Octavia, Superb, Yeti with DSG DQ200 / 0AM transmission SEAT Ibiza, Leon, Altea, Toledo with DSG DQ200 / 0AM transmission Only for vehicles where the original mechatronic part number matches 0AM927769K or verified related hydraulic / valve body references Compatibility Warning DQ200 mechatronics exist in different hardware and software versions. Some codes belong to the same mechatronic family, but they are not automatically plug-and-play interchangeable. Always verify by VIN, gearbox code, original label, software index and sensor configuration before purchase. Common Fault Codes & Symptoms A defective DQ200 mechatronic commonly causes the following issues: P189C / 06300 Function restriction due to insufficient pressure build-up P17BF / 06079 Pump protection maximum limit reached P0562 / 16946 System voltage low P1604 / 005636 Internal control module fault P0841 Clutch pressure sensor A circuit range / performance P1731 Hydraulic unit / valve body malfunction P1746 Clutch temperature monitoring fault P1747 Clutch pressure adaptation limit reached P2716 Pressure control solenoid circuit / open P072C Gear stuck / unable to select specific gear PRNDS flashing Gearbox warning with limp mode No reverse / No drive Common symptom of mechatronic or pressure failure Diagnostic Tip Before replacing the mechatronic, it is recommended to perform a proper diagnostic scan and verify gearbox condition, connector condition, hydraulic pressure faults, pump operation and adaptation status. Installation Installation Steps Verify the exact OEM part number on the original mechatronic unit Disconnect the battery and safely access the transmission mechatronic assembly Remove the old unit carefully and inspect the connector pins and gearbox area Install the replacement mechatronic and reconnect all plugs securely Clear stored fault codes using suitable diagnostic equipment Perform coding / adaptation if required by the vehicle Carry out a test drive and confirm correct gearbox operation Professional Installation Recommended Mechatronics must be professionally installed in the car, including calibration and adaptation. Please make sure that your service center can perform these procedures correctly. Why DQ200 Mechatronics Fail 1. Internal Electronic Failure Wear of internal electronic components can lead to communication problems, control faults and unstable gearbox operation. 2. Hydraulic Pressure Problems Faults inside the hydraulic block, accumulator or valve body can cause improper pressure regulation, harsh shifts, pump overrun or limp mode. 3. Heat & Vibration Stress Continuous operating temperature and vibration can gradually affect internal solder joints and sensitive electronic components. 4. Incorrect Adaptation or Installation Issues Improper installation, missing calibration or adaptation, and connector-related faults may result in poor shifting behaviour after replacement. Quality Assurance & Warranty 12-Month Warranty: This used complete mechatronic unit has been tested for correct operation and is supplied with a 12-month warranty under normal operating conditions. Warranty Coverage Includes: Internal mechatronic malfunction Electronic control failure caused by the unit itself Hydraulic control faults caused by the unit itself Warranty Exclusions: Incorrect installation or incompatible vehicle fitment External wiring or gearbox mechanical faults Physical damage after installation or mishandling Questions or Need Help? Our technical team is ready to assist with compatibility checks, installation guidance and technical support. Contact Important Purchase Information Please verify this part fits your specific vehicle before placing an order Images are for illustrative purposes only Worldwide shipping is available If your country is not listed at checkout, contact us and the order can be processed manually Professional installation and adaptation are strongly recommended The unit includes TCU/ECU and hydraulic block Always verify VIN, gearbox code and original mechatronic label before ordering