Wheel Bearing Endplay Gauge Kit - 0.001" Indicator with Aluminum Hub Plates - KIT-ALUM-HUB1

QA Part Number: TLHD-00008 Vendor Part Number: KIT-ALUM-HUB1 Brand: Kiss Tools Component: Dial indicator kit for aluminum hubs, 0.001" indicator Function: Measures wheel bearing endplay on aluminum hub applications using steel adapter plates Fits / Applications: Aluminum hubs using FF 4.5" x 6 hub cap bolt pattern; TN trailer 5.5" x 6 hub cap bolt pattern; TP trailer 6.75" x 6 hub cap bolt pattern; FL 16-20K steer axle 5.5" x 6 bolt pattern; R drive axle with 7" on-center, 8-stud flange pattern for 5/8" and/or 3/4" studs Key Specs: Includes INDS-2 mount with analog 0.001" dial indicator and protective shield; steel aluminum-hub adapter plates are 0.250" thick and zinc plated; two plates are used on each hub to match the dial indicator magnets Included Items (this SKU): INDS-2 mount with 0.001" analog dial indicator and protective shield; (2) FF-Brk plates; (2) TN-TP-Brk plates; (2) R-Drv-Brk plates Service Notes: Adapter plates bolt to the hub using removed hub cap bolts or drive axle flange nuts, depending on application; acceptable wheel bearing endplay is 0.001" to 0.005" per TMC RP618C Part # KIT-ALUM-HUB1 This dial indicator mount has a protective shield that will help to protect the dial indicator in case the tool is dropped. Without the shield it is very likely the dial indicator will be damaged if dropped. This kit includes a (.001") One Thousandths Dial Indicator. Bearing Adjustment Dial Indicator Gauge for Measuring End Play on Heavy or Medium duty wheel ends. The aluminum bar is .625” thick x 8.25” long, and has multiple holes drilled for multiple applications as examples below and has a 1⁄4-20 thumb screw for easy adjustment. Tool includes extra strong 100Lb pull force magnets, spacers, and bolts. This KIT includes 2 each of the aluminum hub adaptor plates, and one extension tip. Part numbers = (FF-TN-TP-Brk), (R-Drv-Brk), A 1 inch dial indicator tip extension, and the (INDS-2) Dial Indicator mount with shield. Note: An additional 1/4" hole was added in the center of the aluminum hub adaptor plates as a product improvement so you can attached the plates to the dial Indicator for storage. · FF – Steer Axle – 4 1⁄2” bolt circle · TN – Tapered Trailer Axle – 5 1⁄2” bolt circle · TP – Straight Trailer Axle – 6 3⁄4” bolt circle · R – Drive Axle – 7” bolt circle 10/8/2026 update: I have inventory on this kit