Heatmiser neoStat-HW V3 Hot Water Programmer

Smart Hot Water Control from the IMI Heatmiser neo Ecosystem neoStat-HW V3 is a single-channel time clock built for hot water and towel rail control. It uses changeover contacts, making it suited to standard and mid-position valve systems, and is designed as a direct replacement for an existing three-wire thermostat or timer. On its own, neoStat-HW V3 gives full local control: flexible 5/2 day, 7 day or 24 hour programming with four on/off periods per day at 5-minute intervals, plus hot water boost, holiday mode and keypad lock. Paired with neoHub, it becomes part of the wider neo smart control system, adding neoApp scheduling and remote control from anywhere. The unit is flush mounted and communicates over Heatmiser's mesh network, using other neoStats in the system to extend range and improve connection reliability. Key Features Single-channel time clock with changeover contacts, for standard and mid-position valve hot water systems 5/2 Day, 7 Day or 24 Hour programming modes, selectable in setup 4 on/off switching periods per day, adjustable in 5-minute intervals Hot water boost for on-demand extra hot water Holiday mode: keeps timed output off until a set return date/time, then resumes the normal schedule Standby mode: turns the timed output off completely until reactivated 4-digit keypad lock/PIN code to prevent unwanted changes Illuminated soft-touch keys with automatic backlight (turns off after 30 seconds of inactivity) Mesh networking for extended wireless range and connection stability Flush-mount design, requires a 35mm minimum depth back box Compatibility Requires neoHub 2nd Generation or later for app control, scheduling and remote access Not compatible with the original 1st Generation neoHub Installation must be carried out by a qualified electrician, in line with local wiring regulations