Interlocking Tile 2x2

Gorila Pro interlocking rubber tiles give you a commercial rubber floor without glue, tape or a utility knife on every seam. The tiles lock together on all four sides into one tight floor, and you can pull one up and move it anytime. Made in Canada from 94% recycled rubber, FloorScore certified for low odour. Size: 24" x 24" (2' x 2') outside the teeth, 3.7 sq. ft. per tile once installed. Thickness and weight: 6 mm (1/4") 5 lb, 8 mm (5/16") 7 lb, 10 mm (3/8") 9 lb. Colours in stock: solid black, grey fleck. Sold per tile, no minimum. Which thickness? 6 mm: cardio, stretching, studios, floor protection. 8 mm: racks, benches, machines and dumbbells, the most popular. 10 mm: free weight areas and functional zones, best shock and noise absorption. Full comparison in the tile size guide. How many tiles? Room area in sq. ft. / 3.7, plus 5% for cuts. A 10 x 10 ft room takes 29 tiles, a 12 x 20 ft single garage takes 69. Good to know Install: start in a corner, tap each tile in with a rubber mallet, trim the teeth along the walls with a utility knife. Glue down with rubber flooring glue only for permanent commercial floors. Condos and upstairs: the rubber cuts impact noise and vibration. Go 8 mm minimum. Special colours: green, blue, red, orange and beige fleck made to order in 4 to 6 weeks. Ask for a quote. Dropping heavy barbells? Add a lifting platform or the 1" Pro Rubber Tile in the lifting zone. Big open room? Pro rubber rolls cost less per sq. ft. over 200 sq. ft. Cleaning: vacuum, then damp mop with rubber floor cleaner. No solvents or bleach. Shipping: palletized freight, curbside. Full pallet: 500 (6 mm), 400 (8 mm), 300 (10 mm) tiles.