PHOTONEX LED Light Therapy Tunnel for Face & Body

Derma Tech · Photonex Photonex. Light, tailored to you. Bring a customizable LED step to your face and body routine with Photonex, a hands-free tunnel that is open at both ends. Choose red light, blue light, or both together for a purple glow. Infrared has its own separate control. Adjust the intensity, set the timer and let Photonex remember your settings for next time. Red, blue or both Red + blue together create purple light. Infrared is controlled separately. Personalized settings Adjustable intensity, timer and setting memory. Made to pack away Folding supports and a fitted carrying case. Designed around your routine Open tunnel design. The freestanding arch holds the LED panels above the selected face or body area, with openings at both ends. Easy light selection. Use red or blue on its own, or switch both on for purple light. Infrared has a separate setting. Each light control offers four intensity levels plus off. A timed finish. Set the built-in timer; the light session stops automatically when the selected time ends. Settings that stay with you. The device saves the selected intensity levels and time for the next use. Simple storage. Fold the side supports and store Photonex in its fitted carrying case between sessions. How to Use Read the full user manual and safety instructions before your first session. Set up the tunnel. Fully unfold the side supports and place Photonex on a flat, stable surface in a well-ventilated area. Keep both ends and all ventilation slots clear. Connect the power. With the rear power switch off, securely connect the supplied adapter to the device and a suitable power outlet. Switch the rear power switch to ON. Select your light settings. Use R for red, B for blue, or turn on both R and B for purple light. Use IR to control infrared separately. Set each light to level 1–4; 0 turns it off. Leave any light you do not want to use at 0. Set the timer. Press the timer button to select the session time specified in the manufacturer’s guidance. The timer adjusts in 5-minute increments from 5 to 60 minutes. Check the displayed settings before every session, as previous settings are saved. Position and begin. Position the selected face or body area beneath the arch, following the manufacturer’s guidance for placement and eye protection. Keep the supports resting on the stable surface. When ready, press Start/Stop to begin. Finish your session. The light session stops automatically when the timer ends. Press Start/Stop if you need to end it earlier. Switch the rear power switch off and disconnect the adapter after use. The timer range is a device setting, not a recommended exposure time. Follow the manufacturer’s instructions for session duration, frequency, positioning and eye protection. If these instructions are missing or unclear, contact Derma Tech before use. Understanding the light settings Red and blue can be used separately or together. When both are on, their light creates a purple glow. Infrared is an additional setting with its own IR button. Red Light · 630 nm Controlled with the R button. Adjust the red LEDs independently. Blue Light · 423 nm Controlled with the B button. Adjust the blue LEDs independently. Purple Light · Red + Blue Together Turn on both R and B to use red and blue LEDs at the same time. The combined light appears purple; no separate purple button is needed. Infrared · 760 nm Controlled with the IR button. This is a separate light setting; the purple glow comes from red and blue. Controls & session settings The top panel has R for red, B for blue, IR for infrared, a timer button and Start/Stop. To select the purple combination, turn on both R and B. Intensity: levels 1–4 for each light control; level 0 turns that light off. Timer: 5–60 minutes, adjustable in 5-minute increments. Automatic stop: the session ends when the selected time is complete. Memory: the selected levels and timer setting are saved for the next session. What’s included Derma Tech Photonex LED Light Therapy Tunnel Power adapter Fitted carrying case User manual Technical specifications Model ESE-2128DR Light sources Red, blue and infrared, each with its own control Purple combination Red and blue LEDs operating together Wavelengths 630 nm red · 423 nm blue · 760 nm infrared Intensity controls Four intensity levels plus off for each light control Timer range 5–60 minutes in 5-minute increments Device input 24 V DC, 3 A Dimensions (W × D × H) 473 × 484 × 343 mm Approximately 18.6 × 19.1 × 13.5 in Device weight 4.5 kg ±10% Approximately 9.9 lb nominal Storage design Hinged folding side supports Lifetime Warranty Photonex is backed by Derma Tech's Lifetime Warranty. Register your device to enroll in the lifetime extended warranty program. Coverage is subject to Derma Tech's applicable warranty terms and eligibility requirements. Register your device. For coverage details or help with a warranty request, contact Derma Tech. Care & storage Switch off and unplug the device before cleaning or storage. Gently wipe the body and control panel with a soft cloth. Keep water out of the device and store it in a dry place away from heat, humidity and direct sunlight. Keep the vents clear and do not cover the device during operation. Fold the supports for storage and keep the adapter separate from the device.