BWM 100W JPT MOPA Fiber Laser Engraver

100W of MOPA Power for Production Engraving — Motorized Z, Rotary Included, Delivered in About a Week The BWM 100W pairs a JPT M7 (E) 100W MOPA source with a motorized lift column, a rotary and two field lenses. It's air-cooled, runs on 110V, and ships by air to your door for $5,390 with duties included. Compatible Materials: Metal Plastics Stone Leather Rubber When engraving is the job rather than a side service, cycle time becomes the cost that matters. Deep serial numbers, full-coverage logos on steel, and batch runs of anodized parts all take longer than they should on a 30W or 50W machine. The BWM 100W JPT MOPA Fiber Laser Engraver gives you 100 watts of average power with full MOPA pulse control, so you can push depth and throughput without giving up color marking or fine detail. Just as important, it doesn't take a month to arrive. BWM ships by FedEx air freight, typically reaching a US address in around 7 business days, with duties and taxes already included in the price. Why 100W Matters: More Material Removed per Second Average power controls how much energy the laser puts into the part every second. Moving from 60W to 100W gives you roughly two-thirds more energy per second, which translates into faster deep engraving, faster fills on large logos and quicker batch runs. It also gives you headroom to run at higher speeds with fewer passes. One number is worth understanding before you buy: JPT's 100W M7 source is rated at 1.5 mJ maximum pulse energy, a little lower than the 60W's 2.0 mJ. The 100W wins on speed and throughput because it fires more energy overall, not because each individual pulse hits harder. For most production shops, that's the trade you want. Full MOPA Control: 2 to 500 ns and 1 to 4,000 kHz The JPT M7 platform lets you set pulse width (2–500 ns) and frequency (1–4,000 kHz) independently. That's what makes a MOPA laser far more flexible than a Q-switched one. Use short pulses for clean black marks on anodized aluminum and crisp edges on plastics. Tune pulse width and frequency together for color marking on stainless steel and titanium. Use long pulses at full power for deep engraving and relief work on tool steel, coins and firearm parts. BWM specifies JPT's (E) grade M7 source and steers customers away from the lower-cost E2 grade, which it considers less reliable, so output stays more consistent over long production days. Motorized Z-Axis with One-Touch Up/Down Control The 100W's marking head sits on a motorized lift column with up and down buttons on the column, plus a handwheel for fine adjustment. When you switch between a flat plate, a tall part and the rotary, you press a button instead of cranking. Pair that with the dual red-light focus pointers on the galvo head, and you'll find focal height in seconds. On a busy day that saves real time across dozens of setups. Rotary and Two Field Lenses in the Box BWM includes one rotary attachment and two field lenses at the listed price. The rotary handles tumblers, bottles, pens, rings and cylindrical parts. The two lenses let you trade between a tight field for detail and a larger field for bigger layouts. The standard marking area is 110 x 110 mm, with optional lenses up to 300 x 300 mm for panels and batch fixtures. Choosing Your Lens Sizes The field lens sets how large an area the galvo head can mark in a single pass, and it's a trade against fine detail: a smaller lens concentrates the beam into a tighter spot for crisp small text and jewelry-scale marks, while a larger lens trades some of that resolution for a bigger single-pass work area — useful for logos, large data plates or laying out several parts in one job. BWM offers four field lens sizes for the 100W: 100 x 100 mm, 150 x 150 mm, 200 x 200 mm and 300 x 300 mm. Every BWM 100W ships with two lenses of your choice from that range at no extra cost — a common pairing is a smaller lens for fine detail and a larger one for bigger parts, so you're not stuck compromising on a single field size. The rotary included standard is a D80 attachment, for engraving round items such as tumblers, bottles, pens and rings. It swaps in for the flat work table using the same fixture bars, and the dual red-light focus makes re-centering fast. 7,000 mm/s Speed with ±0.003 mm Repeatability Two high-speed galvo mirrors steer the beam at up to 7,000 mm/s. BWM rates repeatability at ±0.003 mm and minimum line width at 0.012 mm, so the same machine that deep-engraves a data plate can also produce readable micro-text and QR codes. The controller supports resume after power interruption and shows real-time job progress and a time estimate, which helps when you're planning a batch run. Thin Metal Cutting for Small Parts BWM rates its 80–120W fiber platform for cutting 1–2 mm metal. In practice, galvo cutting is a slow, multi-pass process that works best on thin brass, stainless and silver around 1 mm or less: jewelry blanks, stencils, small brackets and custom tags. For regular sheet-metal cutting, you need a dedicated fiber cutting machine. EZCAD2 Included, LightBurn Compatible The 100W runs on a JCZ control card with EZCAD2 for Windows and is LightBurn compatible, including control over MOPA pulse width and frequency. Many shops move to LightBurn for its layer workflow and Mac support. The LightBurn galvo license is sold separately. Air-Cooled on Standard 110V Power Despite the higher output, the 100W source is air-cooled, so there's no chiller to buy or maintain. It runs on 110V / 60Hz and draws under 800W. The rated source lifespan is 100,000 hours. The control cabinet includes an emergency stop and separate key switches for the scan head and laser, and BWM states its machines comply with FDA and CE standards. Who the BWM 100W Is Built For Production engraving shops running tumblers, awards and promotional products at volume Firearm manufacturers and FFL/SOT shops doing deep, compliant serial and logo engraving Knife makers and tool manufacturers marking hardened steel Manufacturers adding part numbers, data plates and traceability codes in-house Coin, medallion and relief work where depth and cycle time both matter What the 100W isn't for: fiber wavelength doesn't engrave clear glass, fabric, most wood or clear acrylic well. For those, a CO2 or UV laser is the better tool. What's in the Box BWM-100F marking tower with JPT M7 (E) 100W MOPA laser source and galvo scan head Motorized lift column Control cabinet with emergency stop and key switches D80 rotary attachment Your choice of two field lenses (100 x 100, 150 x 150, 200 x 200 or 300 x 300 mm) JCZ control card with EZCAD2 software Power and connection cables Specifications Parameter Value Model BWM-100F Laser Source JPT M7 (E) MOPA fiber, 100W Average Output Power 100W Maximum Pulse Energy 1.5 mJ Beam Quality (M²) Less than 1.6 Laser Type MOPA pulsed fiber laser Central Wavelength 1064 nm Pulse Width Range 2 to 500 ns (adjustable) Pulse Repetition Rate 1 to 4,000 kHz Output Power Adjustment 10% to 100%, continuously adjustable Output Beam Diameter 7.0 mm (±1.0 mm) Max Marking Speed 7,000 mm/s Standard Marking Area 110 x 110 mm (optional lenses up to 300 x 300 mm) Included Lenses Two field lenses, sizes of your choice Included Rotary Yes, D80 rotary attachment included Galvo Scan Head High-speed digital galvo with dual red-light focus and positioning Controller / Software JCZ control card with EZCAD2; LightBurn compatible Operating System Windows 7 / 10 / 11 (Mac via LightBurn) Cooling Air-cooled (no chiller required) Input Power 110V / 60Hz single-phase (220V available) Power Consumption Under 800W Operating Temperature 0 to 40°C Rated Laser Source Lifespan 100,000 hours Safety Emergency stop, separate scan head and laser key switches; manufacturer states FDA and CE compliance Package Size 77 x 47 x 77 cm (30.3 x 18.5 x 30.3 in) Warranty 3 Years, complete machine Repeatability ±0.003 mm Minimum Line Width 0.012 mm Marking Depth Up to 1.2 mm (material dependent) Z-Axis Motorized lift with up/down buttons Net Weight 60 kg (132 lbs) Warranty and Support BWM covers the complete machine, including the JPT laser source, for 3 years, with lifetime technical support from its engineers by phone, video or TeamViewer. Warranty parts ship directly from BWM, and BWM pays freight both ways if a component needs repair. BWM has been building fiber lasers for around 20 years. The Maker's Chest Difference 🇺🇸 US-based pre-sale guidance — we sell fiber and UV lasers to small businesses, schools and universities every week, and we'll tell you plainly whether this machine, a different wattage, or a different laser type fits the materials and volumes you actually run. 🛠️ Two layers of support — our US team for day-to-day questions, backed by BWM's own engineers for remote diagnostics by phone, video or TeamViewer, with lifetime technical support after the warranty ends. ✈️ Fast, all-in delivery — shipped by FedEx air freight, typically arriving in around 7 business days, with duties, taxes and customs fees already included in the price. No broker invoices after delivery. 🧾 3-year complete-machine warranty — replacement parts ship directly from BWM, and the manufacturer covers two-way freight if a component needs repair. 🧰 Production-ready at one price — motorized Z, rotary and two lenses are all included at $5,390, delivered. ⚙️ Help dialing in production settings — we'll help you find starting parameters for deep engraving, anodized aluminum and color marking, and choose between EZCAD2 and LightBurn for your workflow. BWM 100W vs. 60W: Which Should You Choose? BWM 60W JPT MOPA BWM 100W JPT MOPA Laser source JPT M7 (E) MOPA, 60W JPT M7 (E) MOPA, 100W Max pulse energy 2.0 mJ 1.5 mJ Pulse width / frequency 2–500 ns / 1–4,000 kHz 2–500 ns / 1–4,000 kHz Z-axis Manual handwheel lift Motorized lift with up/down buttons Best at Color marking, fine detail, jewelry, tumblers, serial plates Faster deep engraving, larger batch jobs, thin metal cutting Net weight 50 kg (110 lbs) 60 kg (132 lbs) Price (delivered) $4,290 $5,390 Choose the 100W if deep engraving, large fills or batch production fill most of your day, and you want a motorized Z-axis for fast setups. Choose the 60W if your work is mostly color marking, jewelry and fine detail, where its 2.0 mJ pulse energy and $1,100 lower price make more sense. Frequently Asked Questions about the BWM 100W JPT MOPA Fiber Laser Q: Is 100W worth it over 60W for a fiber laser? A: It is if engraving speed drives your business. The 100W delivers about two-thirds more average power than the 60W, so deep engraving and large fills finish faster. If most of your work is color marking or fine detail, the 60W often gives equal results for $1,100 less. Q: Why does the 100W have lower pulse energy than the 60W? A: JPT rates its 100W M7 source at 1.5 mJ and the 60W at 2.0 mJ. The 100W delivers more total energy per second by firing more pulses, which is what drives production speed. Each individual pulse is slightly less intense. Q: Can the BWM 100W do color marking? A: Yes. As a MOPA laser with independent pulse width (2–500 ns) and frequency (1–4,000 kHz) control, it can produce oxide colors on stainless steel and titanium. Plan to build a settings library for each material and finish. Q: How deep can it engrave, and can it cut metal? A: BWM rates marking depth at up to about 1.2 mm per job, depending on material and number of passes. BWM rates the platform for cutting 1–2 mm metal. Realistically, expect slow multi-pass cuts that work best on thin brass, stainless or silver around 1 mm and under. Q: Does the 100W have autofocus or a motorized Z-axis? A: It has a motorized lift column with up/down buttons and a handwheel for fine adjustment. Focus is set using the dual red-light pointers on the galvo head: when the two dots meet, you're at focal height. Q: Does it need a chiller or 220V power? A: No. The 100W source is air-cooled, and the machine runs on standard 110V / 60Hz power, drawing under 800W. Q: Does it work with LightBurn? A: Yes. It ships with EZCAD2 on a JCZ control card and is compatible with LightBurn's galvo module, including MOPA settings. The LightBurn license is sold separately. Don't install EZCAD2 and LightBurn drivers on the same computer at the same time. Q: What's included with the machine? A: The marking tower with the JPT 100W MOPA source and galvo head, the motorized lift column, the control cabinet, a D80 rotary attachment, two field lenses of your choice, and EZCAD2 software with a JCZ control card. Q: How fast does it ship, and are there import fees? A: BWM ships by FedEx air freight, typically arriving in around 7 business days. Duties, taxes and customs fees are included in the price. Q: What's the warranty and return policy? A: BWM provides a 3-year warranty on the complete machine plus lifetime technical support. BWM machines aren't covered by our standard return policy because they ship directly from the manufacturer. If a machine arrives with serious shipping damage, BWM covers freight both ways to repair or replace it. Q: What lens sizes can I choose, and how many do I get? A: The 100W ships with two field lenses, and you choose their sizes from four options: 100 x 100 mm, 150 x 150 mm, 200 x 200 mm or 300 x 300 mm. A popular combination is a smaller lens for fine detail plus a larger lens for bigger parts or batch layouts. Tell us your typical part sizes when ordering and we'll help you pick. Q: Does the machine come with a rotary attachment? A: Yes. Every BWM 100W ships standard with a D80 rotary attachment, so round items such as tumblers, bottles, pens and rings can be engraved without buying a separate accessory. Q: Why buy from The Maker's Chest instead of directly from BWM? A: You get the same factory-direct air shipping and warranty, plus a US-based team for pre-sale advice, setup help and ongoing questions during US business hours. Specifications BWM 100W JPT MOPA Fiber Laser Engraver Specifications: Parameter Value Model BWM-100F Laser Source JPT M7 (E) MOPA fiber, 100W Average Output Power 100W Maximum Pulse Energy 1.5 mJ Beam Quality (M²) Less than 1.6 Laser Type MOPA pulsed fiber laser Central Wavelength 1064 nm Pulse Width Range 2 to 500 ns (adjustable) Pulse Repetition Rate 1 to 4,000 kHz Output Power Adjustment 10% to 100%, continuously adjustable Output Beam Diameter 7.0 mm (±1.0 mm) Max Marking Speed 7,000 mm/s Standard Marking Area 110 x 110 mm (optional lenses up to 300 x 300 mm) Included Lenses Two field lenses, sizes of your choice Included Rotary Yes, D80 rotary attachment included Galvo Scan Head High-speed digital galvo with dual red-light focus and positioning Controller / Software JCZ control card with EZCAD2; LightBurn compatible Operating System Windows 7 / 10 / 11 (Mac via LightBurn) Cooling Air-cooled (no chiller required) Input Power 110V / 60Hz single-phase (220V available) Power Consumption Under 800W Operating Temperature 0 to 40°C Rated Laser Source Lifespan 100,000 hours Safety Emergency stop, separate scan head and laser key switches; manufacturer states FDA and CE compliance Package Size 77 x 47 x 77 cm (30.3 x 18.5 x 30.3 in) Warranty 3 Years, complete machine Repeatability ±0.003 mm Minimum Line Width 0.012 mm Marking Depth Up to 1.2 mm (material dependent) Z-Axis Motorized lift with up/down buttons Net Weight 60 kg (132 lbs) Warranty BWM 100W JPT MOPA Fiber Laser Engraver Warranty Details: The BWM 100W JPT MOPA Fiber Laser Engraver is covered by a 3-year manufacturer warranty on the complete machine, including the JPT laser source, galvo scan head and control electronics (consumables and shipping damage claims handled separately). Lifetime technical support from BWM's engineering team by phone, video call or TeamViewer remote session, with most issues addressed within 24 hours. If a part fails under warranty, BWM ships the replacement directly; if a component has to go back for repair, BWM covers shipping in both directions. US-based pre-sale and post-sale help from The Maker's Chest team. BWM machines are not eligible for The Maker's Chest standard return policy because each unit ships directly from the manufacturer by international air freight. If your machine arrives with serious shipping damage, BWM covers freight both ways to repair or replace it. Please contact us before ordering with any questions so you're confident the machine fits your work.