Orchard Fruit Trio Waterslide Decal - Ceramic, Enamel & Glass Fusing Overglaze Decal Sheet 10105

Three printed bands, 200 x 93mm each - three different patterns on one sheet, no pre-cut pieces, cut any shape you like. As a guide, the sheet yields roughly 63 pieces at 1 inch (25mm), about 120 at 3/4 inch (19mm), or 30 at 1-1/2 inch (38mm).Waterslide Ceramic Decals – Perfect for Enamel, Glass & Ceramic Overglaze Enhance your artistic creations with high-quality waterslide ceramic decals! These decals feature a clear background for seamless blending and are designed to adhere beautifully to enamel, glass, and ceramic surfaces. ⚠️ Please Note: Colors may appear different after firing compared to how they look on screen. WHITE BACKGROUND OPTION: The white background option is for enamel only - not suitable for glass or ceramic. It's great when your piece has a dark background. How to Use Waterslide Decals 1. Preparation ✔️ Ensure the surface is clean and dry before application. ✔️ Cut the decal to the desired shape, leaving a small border. 2. Soaking in Water ✔️ Submerge the decal in lukewarm water for 30-60 seconds until it starts sliding off the backing. 3. Application ✔️ Place the decal on the surface while still on the backing paper. ✔️ Gently slide the decal onto the surface using your finger or a soft tool. 4. Smoothing & Positioning ✔️ Use a soft cloth or sponge to remove air bubbles and excess water. ✔️ Ensure the decal is smooth and properly aligned. 5. Drying ✔️ Let the decal dry for several hours or follow the manufacturer’s instructions. ✔️ Ensure the surface is completely dry before firing. 6. Firing Instructions Follow the recommended firing temperature based on your surface type: 🔹 Enamel: • Kiln firing – 785°C (1445°F) for 1 minute • Torch firing – Heat gently until the decal changes color, then continue until it fuses with the enamel background. 🔹 Glass: • Heat from 20°C (68°F) to 590°C (1094°F), then increase to 640°C (1184°F) over 4 hours. • Hold at this temperature for 25-30 minutes, then cool down. 🔹 Ceramic (Overglaze Decals): • Heat from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows). • Hold at 785°C (1445°F) for 15 minutes, then cool down. Available Sizes 📏 5-7/8 x 8-1/4 in (148 x 210 mm) 📏 8-1/4 x 11-3/4 in (210 x 297 mm) 💡 Perfect for enamel artists, glassworkers, and ceramic creators! Whether you're adding intricate details or layering multiple decals, these waterslide decals offer versatility and professional-quality results. 📦 Fast Worldwide Shipping | 📞 Expert Support for Artists ✨ Order your ceramic decals today and take your designs to the next level! ✨