Innotox 100U

Innotox 100U is the clinic-size vial of Medytox's liquid botulinum toxin type A. Where almost every other toxin on the market arrives as a freeze-dried cake that has to be reconstituted before use, Innotox is already a finished solution. You break the seal, draw what you need, and inject. The 100-unit presentation exists for the same reason larger vials exist anywhere: throughput. A clinic running full-face treatments back to back gets through 50 units quickly, and every additional vial opened is another seal broken and another few minutes lost. At 100 units in 2.5 ml, one vial covers most full-face sessions on its own. The practical argument for the liquid format is consistency. Reconstitution is where dose drift creeps into a busy practice - two practitioners, two slightly different diluent volumes, two different concentrations from the same box. Innotox is diluted at the factory to a fixed 4 units per 0.1 ml, so the number on the syringe means the same thing on Tuesday as it did on Friday, and the same thing in every treatment room. Why practitioners choose Innotox 100U No reconstitution step There is no saline to stock, no vial to swirl, and no arithmetic at the end of a long day. Preparation takes seconds rather than minutes, and one full step of open-vial handling disappears from the workflow. Formulated without albumin or gelatin Innotox is stabilised with L-methionine and polysorbate 20 rather than human serum albumin or animal-derived gelatin. That matters to practitioners whose patients ask what is in the vial, and it is the usual reason Innotox gets chosen over older powder formulations such as Botulax 100U. Tight, predictable spread The solution formulation is associated with limited diffusion from the injection point. In the periorbital area, or anywhere a millimetre of unwanted spread changes the outcome, that predictability is the whole point. Made by an established Korean manufacturer Medytox has been producing botulinum toxin in Korea for longer than most of its domestic competitors, with an export record across Asia, South America and the Middle East. What it is used for In aesthetic practice, Innotox is used for glabellar and forehead lines, lateral canthal lines, masseter reduction and lower-face contouring, bunny lines, chin dimpling and platysmal bands. It is also used for axillary and palmar hyperhidrosis. In therapeutic settings it is used for blepharospasm, cervical dystonia, paralytic strabismus and post-stroke limb spasticity. Which of these are approved indications depends on where you practise, and treatment should always sit inside your own scope of practice and clinical judgement. Composition The active ingredient is Clostridium botulinum toxin type A, Hall strain, at 100 units per vial. It acts by blocking acetylcholine release at the neuromuscular junction, producing temporary and fully reversible relaxation of the injected muscle. L-methionine - antioxidant stabiliser that protects the toxin protein while it sits in solution Polysorbate 20 - surfactant that keeps the active ingredient evenly dispersed Buffered saline, pH 7.0 - the solution vehicle Innotox 100U specifications Product name Innotox 100U Manufacturer Medytox Inc. Country of origin South Korea Content 100 units / 2.5 ml liquid solution Concentration 4 units per 0.1 ml Format Ready-to-use liquid, 1 vial per box Storage 2-8 °C, protected from light. Do not freeze. Shelf life 36 months from manufacture Handling Check the vial before use. The solution should be clear and colourless with no visible particles, and the seal should be intact. Cloudiness, discolouration or a compromised closure means the vial goes in the bin, not the tray. Dosing follows standard botulinum toxin type A practice and should be adjusted for muscle mass, treatment history and prior response. Refer to the manufacturer's prescribing information for the detail. Onset is usually visible from day two or three, with the full effect settling over seven to fourteen days. Most patients see results lasting roughly three to six months. Duration varies with dose, treated area, muscle bulk and individual metabolism - patients treated repeatedly over several years often report longer gaps between sessions. Botulinum toxin is a prescription product and should be administered only by appropriately trained and licensed practitioners. It is contraindicated in pregnancy and breastfeeding, in known hypersensitivity to any component, where there is infection at the intended injection site, and in neuromuscular disorders such as myasthenia gravis. 50U or 100U? Innotox 50U Innotox 100U Units per vial 50 100 Volume 1.25 ml 2.5 ml Concentration 4 U / 0.1 ml 4 U / 0.1 ml Best suited to Single-area treatments, lower patient volume Full-face sessions, busy clinics The concentration is identical, so the choice is purely about how much you get through before the vial's open life runs out. If you are treating a handful of patients a week, Innotox 50U wastes less. If you are running a full list, the 100U vial costs less per unit and means fewer seals broken. Storage and shipping Innotox must be held between 2 °C and 8 °C throughout. Every order leaves Seoul in insulated cold-chain packaging with coolant, and we track transit so the product reaches you inside its temperature range. Refrigerate on arrival, never freeze, and do not leave vials sitting at room temperature. Buy Innotox 100U from MY SKIN KOREA We source Innotox directly through Korean supply channels, so what arrives is authentic Medytox product in its original Korean packaging with a full remaining shelf life. Cold-chain shipping is standard on every order, we ship worldwide from Seoul, and pricing improves at clinic volumes - see wholesale for trade terms. Browse the rest of our botulinum toxin range, or pair your order with numbing creams for patient comfort. Many clinics order toxin alongside dermal fillers and skin boosters in a single shipment to keep freight costs down. Import rules for aesthetic injectables differ by country. If you are unsure what applies where you practise, talk to us before ordering and we will tell you what we can send and what documentation comes with it. Frequently asked questions Does Innotox 100U need to be reconstituted? No. It ships as a ready-to-use liquid at 4 units per 0.1 ml. You draw the dose straight from the vial. How many units are in a vial? 100 units in 2.5 ml of solution. How long does Innotox last? Typically three to six months, depending on dose, area treated, muscle bulk and individual metabolism. How soon do results show? Usually two to three days after injection, with the full effect over seven to fourteen days. Does Innotox contain albumin? No. It is stabilised with L-methionine and polysorbate 20 instead of human serum albumin or gelatin. What is the difference between Innotox 50U and 100U? Only the vial size. Both are supplied at the same 4 units per 0.1 ml concentration. How should it be stored? Between 2 and 8 °C, away from light. Never freeze it. Who can order Innotox 100U? It is intended for licensed medical practitioners and clinics. Requirements vary by country, so please confirm what applies in your market.