Monolith Printed Gantry / Motion Hardware Kit

This kit includes hardware required for the monolith gantry or motion (depending on selection), note you may also need bearing (F695-2RS, 695-2RS) for motion kits and if you're purchasing motion kit only you will need M4x2.5 set screws. All hardware is Carbon steel fasteners with black nickel plating where possible, or they will stainless steel if not suitable hardware in carbon steel with black nickel plating. The kit comes with a common set of hardware that is shared for 6/9mm for gantry hardware kit, but for motion those are sold in 6 or 9mm configuration. What is Included: Gantry Hardware Kit Last Updated: 19.08.26 Part Qty M4x2.5 set screw 9 M3xD5x4 threaded insert 9 M2x10 self-tapping screw 6 M3 2020 drop-in T-nut 9 M3x6 BHCS 14 M3x8 SHCS 7 M3 hex nut 5 M3 washer 25 M3x10 SHCS 3 M3x12 SHCS 3 M3x16 SHCS 10 M3x20 SHCS 18 M3x25 SHCS 4 M3x30 SHCS 22 M3x30 BHCS 14 M3x35 SHCS 22 M3x40 BHCS 9 M3x45 SHCS 18 M3x6 FHCS 14 M5 2020 drop-in T-nut 42 M5 hex nut 9 M5x10 BHCS 33 M5x12 BHCS 7 M5x16 BHCS 36 M5x20 BHCS 11 M5x30 BHCS 11 M5x40 SHCS 16 Shim 1mm (M5) 36 Motion Hardware Kit (6mm) Part Qty Shim 0.5mm 25 Shim 1.0mm 6 D5x20mm smooth pin 2 D5x30mm smooth pin 10 GT2 20T 6mm pulley 5mm ID 8 Motion Hardware Kit (9mm) Part Qty Shim 0.5mm 25 D5x25mm smooth pin 2 D5x40mm smooth pin 10 GT2 20T 9mm pulley custom live shaft idler 4 4 GT2 20T 9mm pulley regular (for AWD config) 4 Documentation: https://github.com/Monolith3D/Monolith_Gantry