Simon Hope Threading Jig, 1inch stem, 1.1/4inch spindle, 12 tpi with integrated hinge plate
NEW MK 2 THREADING JIG IS NOW SOLD AS STANDARD. THE NEW JIG HAS A BUILT-IN HINGE PLATE AND IMPROVED PERFORMANCE. PLEASE CHECK THE 65MM MINIMUM MEASUREMENT NEEDED AS PER PICTURE IN IMAGES.The jig comes with 1" stem as standard. 16 mm, 19 mm, and 30 mm stems are also available on request when ordering. Just add a note in the comment section upon checkout, and ill swap out the 1" for another option!INCLUDES 16MM CUTTER ABOUT THE HOPE THREADING JIG: Its called the easy-set threading jig because the depth cut is done by twisting the outer (silver round handle) clockwise to push the main body into the cut. The handle has an internal click system so 9 twist clicks give you the depth for the 12 TPI , 7 twist clicks gives you the depth for the 14 TPI, 5 twist clicks gives you the depth for the 16 tpi and 3 twist clicks give to the depth for the 20 tpi. The handle on the back gives a 6" swing so you can rotate under control easily. The 20, 16 ,14 and 12 tpi parts are machined with the front thread out of one piece. This gives ultimate accuracy, unlike systems where the thread adapters have to be attached to a common holder. THREADS NOW AVAILABLE ARE: 3/4 X 16 TPI 16 and 12 tpi 1" x 8" TPI 16 and 12 tpi M30 x 3.5 16 and 12 tpi M33 x 3.5 full range 1 1/14 x 8 full range 1 1/2 x 6 tpi, 16 and 12 tpi