AlbaChem 1632 Water-Based Screen Opener - 19oz Can
Fast-acting foaming screen opener formulated for water-based screen printing inks, quickly clearing dried-in ink and clogged mesh while leaving no film or oily residue. Characteristics The AlbaChem 1632 Water-Based Screen Opener – 19oz Can is a fast-acting aerosol cleaner designed to safely open screen mesh clogged with dried water-based ink during screen printing production. Its foaming action penetrates dried-in ink to help restore open mesh and maintain clean, consistent print areas without requiring the screen to be removed from the press. Designed for convenient on-press use, AlbaChem 1632 can be applied directly to clogged or partially blocked areas of the screen. A thin application helps loosen dried ink so normal squeegee passes can reopen the mesh, reducing interruptions and helping printers get back into production quickly. The formula works quickly without leaving behind an oily residue or film that could interfere with printing. This makes it especially useful for production environments where water-based inks can begin drying in the mesh during longer print runs, production pauses, or warm shop conditions. In addition to opening clogged screens, AlbaChem 1632 can also be used for cleaning ink and dirt from printing press surfaces. The foaming formulation provides a convenient solution for routine press-side maintenance and spot cleaning. AlbaChem 1632 contains no APEO (alkylphenol ethoxylates) or NPEO (nonylphenol ethoxylates) and has a fresh, pleasant scent. Currently only in stock at our TX location. Features ▼ Fast-acting water-based ink screen opener Helps quickly reopen mesh clogged with dried ink Designed for convenient on-press use Foaming cleaner penetrates dried-in ink Leaves no film or oily residue Helps reduce production interruptions caused by clogged mesh Can also clean ink and dirt from printing presses Fresh, pleasant scent Contains no APEO or NPEO Convenient aerosol application Specifications ▼ Brand AlbaChem Product Water-Based Screen Opener Product Number 1632 Product Type Aerosol Screen Opener / Cleaner Primary Application Opening Clogged Screen Printing Mesh Ink Compatibility Water-Based Screen Printing Inks Application Method Aerosol Spray Formulation Foaming Cleaner Residue Leaves No Film or Oily Residue Net Weight 19 oz. (539 g) Container Type Aerosol Can Case Pack 12 Cans Case Weight 18 lbs. APEO None NPEO None Usage Tips ▼ Shake the can well before use. Apply only a thin amount of screen opener to areas where ink has begun drying or clogging the mesh. For on-press applications, spray approximately 6–8 inches from the screen using a circular motion. After application, several squeegee passes can help completely reopen the affected mesh. Use proactively when water-based ink begins showing signs of drying in the screen rather than waiting for severe clogging. Keep the screen properly flooded during production pauses to help reduce water-based ink drying in the mesh. Follow the product label and current Safety Data Sheet before use. Because this is a pressurized aerosol product, keep away from heat, sparks, open flames, and other ignition sources. Protect the container from sunlight and temperatures above 122°F (50°C). Questions? Need help selecting the right screen printing supplies? Feel free to live chat with us if you have any questions.