Recycled Rubber Roof Slate – Lightweight Synthetic Slate Tiles, Slate Grey
Natural slate looks the part but a full pallet can push past what a garden building, porch or dormer cheek can structurally carry — and handling it safely on a ladder is a job in itself. This synthetic slate is moulded from recycled rubber and plastic, so it carries roughly a third the weight of stone per square metre while keeping the same flat, riven slate silhouette from the ground. Each tile interlocks and nail-fixes in the same lapped pattern as a traditional slate roof, so existing roofing skills transfer straight across — the difference is in what you're lifting up the ladder and what the structure underneath has to bear. Specification Property Detail Material Recycled rubber and plastic composite Colour Slate Grey Pack size 27 tiles per pack (1.5m² coverage) Bundle options 1.5m², 6m² (4 packs), 12m² (8 packs) Crown ridge cap Sold separately, 20 tiles per pack (3m² ridge coverage) Fixing Nail-fixed, interlocking lap pattern — standard slating technique Weight Substantially lighter per m² than natural or concrete slate — always confirm against your specific roof structure's load capacity before ordering Ordering guidance Work out your roof area including standard slate overlap/waste allowance and round up to the nearest pack — coverage figures above are per pack before waste. Finish the ridge line with the matching Crown Ridge Cap variant. This sits alongside our Brazilian Natural Roofing Slate and Concrete Interlocking Roof Tile as a third pitched-roof covering option — choose this range where weight, handling or budget rule out natural stone or concrete. Pair with our Breathable Roofing Membrane underlay and Dry Verge Kit to complete the roof build-up. FAQ How does the weight compare to natural slate? This recycled rubber/plastic composite is significantly lighter per m² than natural stone slate — a genuine advantage on older rafters, extensions and outbuildings where loading is tight, but always check against your actual structural calculations rather than assume. Will it fade or become brittle in UV? It's manufactured for outdoor roofing use; as with any synthetic roofing material, ask your supplier for the manufacturer's specific UV/weathering warranty period if that's a deciding factor for your job. Can I mix it with natural slate on the same roof? It's designed to visually read as a slate roof from the ground, but it is not the same material — check the finished appearance against your planning requirements before use on a listed building or in a conservation area. How do I finish the ridge? Use the matching Crown Ridge Cap variant, sold in 3m²/20-tile packs. What's the coverage per pack? 27 tiles cover 1.5m² before allowing for cutting waste at hips, valleys and verges — add 5-10% extra for a typical roof.
Roof Slate – 1.5m² Pack (27 tiles), Roof Slate – 6m² (4 Packs), Roof Slate – 12m² (8 Packs), Crown Ridge Cap – 3m² Pack (20 tiles)