DESCRIPTION The DLG-mini is defined as an entry-level hand-launch glider. Designed in accordance with mainstream DLG principles to suit a variety of flying environments, it is a high-performance model manufactured using modern metal molds and a high-temperature molding process. PNP version is optional, the servos are preinstalled. SPECIFICATIONS: Preferences Motorless Wing span 950mm Length 640mm Wing area 12.6dm2 Wing chord 150mm Empty weight 110g Flying weight 160g Wing airfoil SY II series CG 45mm from leading edge Tow hook setting NO Ailerons YES Elevator YES Rudder YES Flaps NO Required Radio 4 channels Recommend equipment configuration for a motorless version basic configuration Servos EMAX ES9052 *4 Settings: Ailerons: Up 12mm, Down 8mm Elevator: +10mm / -10mm Rudder: +15mm / -15mm Butterfly (Crow): Ailerons down 45°, Elevator -4mm SPEED: Ailerons up 2mm; adjust elevator based on actual flight attitude SPEED: Ailerons up 2mm; adjust elevator based on actual flight attitude CRUISE: Ailerons 0, Elevator 0 THERMAL: Ailerons down 3–6mm; adjust elevator based on actual flight attitude ZOOM: Ailerons up 1.5mm; adjust elevator based on actual flight attitude PRESET: Ailerons down 1–2mm Another important thing about the surface of the glider: this RCRCM glider is fully moulded. Mould precision ensures that each glider has a complete aerodynamic layout but in the process of composite production, there is a slight chance of very tiny air bubbles or slight cloth grain. In the unlikely event that these small imperfections exist, they do not affect the structural strength or flight performance. Glider long term storage: Hang glider vertically to reduce the stress on the glider surfaces to avoid deformation that could adversely affect flight performance and trim.