Universal Superslide line set

Wear and friction are a thing of the past! Aimed at big air riders who need the toughest lines and least amount of friction to have a long lasting line set and direct kite control even during multiple rotations and loops. On our Superslide line set the first 2m on all 4 lines is covered by a 2.5mm PTFE tube. The friction of PFTE against PTFE is so low that it only start to become noticeable after multiple rotations and wear on that line line section is totally eliminated. !Needs 4mm holes in the bracket! To make this slightly thicker line run smoothly through the power bracket / V-split both holes need have a diameter of 4mm ±0.05mm. You can replace the original bracket with our small steel bracket (13g) if your current bracket isn’t compatible. Majestic brackets are safe to drill out with a 4mm drill bit. To make sure the handshake knot with the flagout line still fits through all systems both front lines come with a steel stopper attached around the line that has a max diameter of 5.5mm so you can use the original flagout line. The steel stoppers have a tight fit around the line to eliminate wear from the line rotating and moving inside the bracket as now only the steel stopper makes direct contact with the bracket and sits tight enough around the line to not move at all. The lines have a 3m lower back line section and 6m lower front line section from 1.5mm Braidtech SK99+ 450 lines with the rest of the back lines from 1.1mm sk99 300 lines to have less drag. Upper front lines are from sk99+ 450. The line set fits any modern 4 line bar with all 4 lines having an equal total length. Does not fit bars like the Core Sensor 1-4, Duotone Click and older bars like F-One monolith for example!