Victron Energy 2000VA Off Grid Mains Kit With Orion & SmartSolar - Multiplus 12/2000/80

AVAILABLE OPTIONS WITH THIS KIT Socket Finish – This refers to the 13A sockets and switches that you will see once fitted into your furniture. These are available in Flat Brushed Steel, Raised Black Nickel or a Raised Matt Black finish in a standard UK 2 gang fitting, or they can be upgraded to three sets of grey C-Line 13A sockets in a gunmetal grey 2 module frame (6 individual outlets in total). Please see the image of the sockets for colour/style reference. 240V Mains Consumer Unit – This is the mains consumer unit which distributes power from the site supply to the outlets. This can either be provided to you with all the consumer unit parts (enclosure, breakers, cables etc.) for self-assembly by a professional electrician, or we can pre-wire the consumer unit for you in-house. With this option all that's required once installed, would be to attach the sockets and 16A hook up point. Please note, the pre-assembled unit is the mains consumer unit only, not the entire kit. The rest of the equipment (12V) will be in kit form and will require assembly. HIGH LEVEL KIT FEATURES 2000VA (1600W) Inverter Charger with power boost function on mains 30A MPPT Solar Controller (For connection to a solar panel) 30A DC-DC charger (For leisure battery charging from your vehicle) 1000A High current DC distribution system 100A Low current DC distribution system Battery isolation and current/voltage monitoring Mains hook up COMPONENTS VICTRON ENERGY MULTIPLUS 12/2000/80 INVERTER CHARGER The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a highspeed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features. Input voltage range - 9.5 – 17V Output Output voltage - 230VAC ± 2% Frequency: 50Hz ± 0,1% (1) Cont. output power at 25°C(3) - 2000VA Cont. output power at 25°C - 1600W Cont. output power at 40°C - 1400W Cont. output power at 65°C - 1000W Peak power - 3500W Maximum efficiency - 93% Zero-load power - 10W Zero-load power in search mode - 3W AC Input - Input voltage range: 187-265VAC / Input frequency: 45 – 65Hz Charge voltage 'absorption' - 14.4V Charge voltage 'float' - 13.8V Storage mode - 13.2V Leisure battery charge current - 80A Starter battery charge current - 1A Battery temperature sensor - Yes Weight - 15.5KG Dimensions (hxwxd) - 506 x 236 x 147 mm Part number - PMP122200000 VICTRON ENERGY ORION 12/12 30A DC-DC NON ISOLATED CHARGER The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles where the alternator and the starter battery are used to charge the leisure battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. Input voltage range - 10-17V Under voltage shut down - 7V Under voltage restart - 7.5V Nominal output voltage - 12.2V Output voltage adjust range - 10-15V Cont. output current at nominal output voltage and 40 °C - 30A Cont. output power at 25 °C - 430W Cont. output power at 40 °C - 360W Efficiency - 87% No load input current - < 80 mA Standby current - Less than 1mA DC connection - Screw terminals Maximum cable cross-section - 16 mm² AWG6 Weight - 1.8 kg Dimensions - 130 x 186 x 80 mm VICTRON ENERGY SMARTSOLAR 100/30 MPPT SOLAR CONTROLLER This Victron SmartSolar 100/30 MPPT charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Battery voltage (Auto select) - 12-24V Rated charge current - 30A Nominal PV Power (12V) - 440W Max PV short circuit current - 35A Automatic load disconnect - Yes Max PV open circuit voltage - 100V Peak efficiency - 98% Power terminals - 16 mm² Weight - 1.3KG Dimensions (h x w x d) - 130 x 186 x 70MM VICTRON ENERGY LYNX 1000A M10 DISTRIBUTOR The Victron Lynx 1000A Distributor is a modular DC busbar with spaces for four DC fuses. It monitors the status of each fuse and displays its condition with an LED on the front. The Lynx Distributor is part of the modular Lynx distribution system. Voltage range - 9 - 60Vdc Supported system voltages - 12, 24 or 48V Reverse polarity protection - Yes (1) Current rating - 1000Adc continuous Power consumption (2) - Maximum 100mA (with all LEDs illuminated) Terminals - M10 Enclosure dimensions - (hxlxw) 290 x 170 x 80MM Unit weight - 2.2 kg (1) The RJ10 cable connection is not protected against reverse polarity (2) Powered from Lynx Shunt VE.Can or Lynx Smart BMS VICTRON ENERGY 500A SMARTSHUNT This 500A Victron SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. SmartShunt - 500A Supply voltage range - 6.5 - 70 VDC Current draw - < 1mA Input voltage range, auxiliary battery - 6.5 - 70 VDC Battery capacity (Ah) - 1 - 9999 Ah Operating temperature range - -40 +50°C (-40 - 120°F) Measures voltage of second battery, or temperature, or midpoint - Yes Temperature measurement range - -20 +50°C VE.Direct communication port - Yes INCOMING MAINS CONSUMER UNIT This part of the kit is available in two forms; we can either provide you with all the consumer unit parts (enclosure, breakers, cables etc.) for self-assembly by a professional electrician, or we can pre-wire the consumer unit for you in-house. With this option all that's required once installed, would be to attach the sockets and 16A hook up point. Please just select your preference from the "240V Mains Consumer Unit" option above. Please note, the pre-assembled unit is the mains consumer unit only, not the entire kit. The rest of the equipment (12V) will be in kit form and will require assembly. This is a small mains consumer unit that runs from the surface mount 16A hook up point on the outside of your van and feeds the input of the inverter. This protects the inverter from any power surges and overloads and is the first point of safety, providing an earth to both the inverter body and the chassis of your camper van. 4 Way plastic consumer unit 30mA 63A Double pole Type A RCD 16A Double pole MCB 100A DP Bus bar Surface mounted 16A magnetic hook up point (Available in black or white) Relevant electrical safety stickers Hook up input - 4.0mm² three core arctic flex - 5M Inverter input - 2.5mm² three core flex - 2M Inverter earth (Terminated with ring terminal) - 6mm² tri rated flex - 2M Vehicle earth (Terminated with ring terminal) 6mm² tri rated flex - 2M OUTGOING MAINS CONSUMER UNIT This part of the kit is available in two forms; we can either provide you with all the consumer unit parts (enclosure, breakers, cables etc.) for self-assembly by a professional electrician, or we can pre-wire the consumer unit for you in-house. With this option all that's required once installed, would be to attach the sockets and 16A hook up point. Please just select your preference from the "240V Mains Consumer Unit" option above. Please note, the pre-assembled unit is the mains consumer unit only, not the entire kit. The rest of the equipment (12V) will be in kit form and will require assembly. This is the central mains consumer unit for the camper van. This takes the output from the inverter/hook up and feeds the power via double pole RCD's and MCB's to the mains sockets and switches. 8 Way plastic consumer unit 30mA 63A Double pole Type A RCD 3 X 10A Double pole MCB's 100A DP Bus bar 3 X 13A UK double sockets or C-Line alternative 3 X double surface mount back boxes or C-Line alternative Single surface mount back box Inverter output - 6.0mm² three core arctic flex - 2M Sockets & Switches - 1.5mm² three core flex - 3M each Vehicle earth (Terminated with ring terminal) 6mm² tri rated flex - 2M 12V DISTRIBUTION 12V 12 Way fuse box with a built in negative bus bar, saving the time and extra money having to install a separate one. LED function on each output that will illuminate to show any blown fuses. Numerous labels for easy identification of outputs. Complete with 12 fuses (3 X 5A, 3 X 10A, 3 X 15A, 3 X 20A). Mounting screws. ADDITIONAL ITEMS PV Solar Isolator 600A Battery Isolator Relevant fuses and fuse holders Battery terminals with PVC covers CABLING We will provide adequate lengths of cable to complete the installation as seen on the screen, the lengths provided are suitable for most camper installations, but if you need anymore, this is all available to buy on our website. For use to wire both the input and output of the Orion DC-DC charger, the output of the SmartSolar MPPT Controller, and the cabling to the 12V fuse box - 16mm² Red Positive Hi Flex - 10M 16mm² Black Negative Hi Flex - 10M For use to wire the Multiplus-II Inverter Charger to the Lynx Distribution System, and to connect this to the chassis of the van and to power the Lynx via the isolator and shunt from the leisure battery - 70mm² Red Positive Hi Flex - 3M 70mm² Black Negative Hi Flex - 3M For use to wire the input of the SmartSolar MPPT controller to the PV isolator - 6mm² Red Positive Double Insulated PV Cable - 3M 6mm² Black Positive Double Insulated PV Cable - 3M For use to wire from the low current 12 way fuse box to your 12V accessories - 2.0mm² Twin core automotive thin wall cable - 1 X 30M All crimps, terminals, and heat shrink will be provided in the kit to make the necessary connections. ADDITIONAL IMPORTANT INFORMATION As with all the kits and layouts provided on our site, they serve as a guide only. All wiring and installation must be carried out by a qualified professional. Disconnect all AC and DC power sources to prevent accidental shock. It is the installer’s responsibility to ensure compliance with all the applicable installation codes, regulations, and to ensure the equipment is fitted correctly. ELECTRICAL INSTALLATONS MUST BE COMPLETED BY A QUALIFIED PROFESSIONAL. WIRING SHOULD BE IN ACCORDANCE WITH THE LATEST EDITION OF THE IET REGULATONS (BS 7671).