Sealoplast 20mm thick acoustic sponge + graphite cloth

NEW Sealoplast lath-and-plaster repair system A new addition to the range is the Sealoplast lath-and-plaster repair system, designed to repair damaged lath-and-plaster walls and ceilings. Consists of a 10mm or 20mm thick length of acoustic, fire-resistant sponge, which can be cut to size and adhered to damaged areas of lath-and-plaster ceilings or walls. Combined with our new fire-resistant patch paper, this is an economical and effective way to repair damaged ceilings and walls, without the need for re-plastering. Both products, once bonded in place, can be coated with Envirograf EP/CP plasterboard coating to provide up to 71 minutes of fire protection. Advantages – The range is ideal for lath-and-plaster walls or ceilings in need of upgrading to a 90-minute fire rating – Sealoplast can be used to repair any sized hole in walls or ceilings, providing a flat surface to which our lath-and-plaster coating (Product 105) can be applied – FR wallpaper paste has fire retardant qualities, allowing the wallpaper to resist the spread of flame for longer Application Instructions S/Ceiling Fire-Resistant Cloth: - Clean off any existing wall or ceiling paper. - Scrape off any loose paint. If gloss paint, rub down with glass paper and coat with Product 93 ES/Stabond. - Distemper – ensure that all distemper is removed from the ceiling and that distemper is not under existing coatings. - Ensure the cleaned off ceiling is sealed with product 93 ES/Stabond to ensure the adhesive does not dry out due to the ceiling absorbing moisture. - Cut the Envirograf® S/Ceiling Intumescent Cloth to length. - Applying Envirograf® S/Ceiling Intumescent Cloth to ceilings is a two-person job; one applying the adhesive with a comb float whilst the other is applying the S/Ceiling. - Apply a coat of CA/N adhesive to the ceiling using a serrated edge application (As used when wall tiling). - To press S/Ceiling onto the ceiling (white side affixed to ceiling) it is best to use a wide flat clean scraper & roll with a paper type roller. - CA/N adhesive approximate coverage of 3m² per litre. - If the ceiling were clean, two people could apply approximately 20 meters of S/Ceiling in 90-120 minutes. - Emulsion or other paints can be applied after 2-3 hours, giving the adhesive time to dry before coating. NOTE – The white side of the cloth is affixed to the adhesive. The speckled side down for decorating. If it is necessary to overlap the joints by approximately 15-20mm using a straight edge if the edges are frayed, if not just butt together and cut through the cloth taking off material and lightly roller the edges with a wallpaper roller. Data Sheets TECHNICAL DATA TD084-Wallpaper_paste-02-2019.pdf APPLICATION DATA AP084-S_CP Card-02-2019.pdf<.a> AP084-Wallpaper_paste-02-2019.pdf AP084-S/Ceiling-05-2023.pdf COSHH DATA HS084-S/Ceiling-05-2023.pdf HS084-S_CP Card-02-2019.pdf HS084-Wallpaper_paste-02-2019.pdf HS084-C/AN-08-2022.pdf