Sensecore X200 Smart Control Welding Helmet for Professional Welder

Professional Series — Sensecore X200 Full Command Auto-Darkening Welding Helmet for Pro Welders 9-channel memory. Shade 4–15. TRS fade mode. EPD backlit display. The Sensecore X200 is engineered for professional welders who need total control over every parameter — and the speed to change settings without breaking stride. 4–15Shade Range 9Memory Channels 4Arc Sensors 0.04msSwitching Time Built For The Welder Who Knows Exactly What They Want The X200 is not a helmet you set once and forget. It is a precision tool for welders running multiple processes — stick, MIG, TIG, flux-core, plasma cutting — who need to switch parameters fast, recall saved settings on the job, and trust that the lens will react exactly when they need it to. EPD Backlit Display Unlike standard LCD screens, the X200 uses an EPD display with backlight — readable in direct sunlight, in low-light shops, and under every condition a pro welder works in. Your settings are always visible at a glance. Control System Every Parameter, Exactly Where You Want It MODE 4-Mode Cycling Short press to cycle through Weld / Cut / Grind / Black Glass (locked). Switch processes without removing the helmet or interrupting your workflow. SHADE Shade 4–8 / 9–15 Navigate with left/right keys. Press AUTO to enter automatic shade mode — the helmet selects the shade, and you can fine-tune with ±offset compensation on top of the auto value. SENSI Sensitivity 0–9 Short press to enter, use up/down to adjust across 10 sensitivity steps. Press AUTO for automatic sensitivity detection. Critical for low-amp TIG work where the arc is subtle. DELAY Delay 1–9 + Auto Short press to adjust how long the lens stays dark after the arc stops. Press AUTO for auto-delay mode with manual offset compensation — tuned for your specific process speed. TRS Fade-to-Clear Mode Enable TRS for a gradual transition from dark back to clear — instead of an instant snap, the lens fades. Easier on the eyes over long sessions. Long-press for a TEST function to verify the lens is responding correctly. MEMORY 9-Channel Parameter Storage Short press to recall a saved preset. Use up/down to scroll through 9 memory channels. Use left/right to choose between Read and Write. Save your TIG setup, your stick setup, your plasma cut setup — and switch between them instantly. MENU Menu + Lens Group Power Short press to open the full settings menu. Long press to power the lens group on or off — useful when storing the helmet or switching from welding to grinding mode entirely. OUTER KNOB External Dial + Quick-Save Turn to adjust the current parameter. Press to select weld mode. Long press to toggle AUTO mode without going into the menu. The outer button short-press quick-saves your current settings; long press (1s) activates GRIND mode instantly. What Sets It Apart Professional Features, Production-Grade Build 01 EPD Backlit Display — Always Readable The X200 uses an electronic paper display with backlight instead of a basic monochrome LCD. Sharper contrast, visible in bright sunlight and dark conditions alike. You can read your shade, sensitivity, and delay settings without squinting or removing your helmet. 02 9-Channel Memory — Switch Setups in One Press Nine fully independent memory channels mean you can store a complete parameter set for every process you run — E6011 stick, TIG stainless, MIG structural, plasma cut — and recall any of them with a single button press. No re-adjusting between jobs. 03 Shade 9–15 — Full High-Amp Coverage The X200 extends shade coverage to DIN 15, covering high-amperage MIG, flux-core, and submerged arc processes that lower-range helmets cannot protect against. The complete shade range — DIN 4 through 15 — means this is your only helmet from tacking to heavy structural. 04 Built-In Work Light with Ambient Sensing Flip the helmet open to activate the work light. Short press to cycle brightness. Long press to toggle ambient light sensing — when on, the light stays off in bright conditions and turns on automatically when ambient light drops. Extinguishes when you strike an arc to protect the sensor. 05 4 Independent Arc Sensors — No Dead Angle Four arc sensors positioned across the lens give you 360-degree arc detection coverage. Overhead welds, tight corners, pipe work with restricted sensor sight lines — the X200 detects the arc reliably regardless of position. 06 TRS Fade Mode — Easier on Your Eyes Enable TRS and the lens gradually transitions from dark to clear after the arc extinguishes, rather than snapping instantly. Reduces eye fatigue during long sessions and is noticeably more comfortable for production welding shifts. 07 Rechargeable 3.7V Li-ion Battery — 4+ Hours Runtime The built-in 3.7V 1500mAh lithium polymer battery charges fully in 2 hours and delivers over 4 hours of continuous runtime at full brightness (100 lm). Two backup CR2450 batteries included. You will not be shut down mid-shift by a dead battery. Integrated Work Light See Your Work Before You Strike The X200 includes a built-in work light activated by opening the helmet shell — no separate switch to hunt for with gloves on. BRIGHTNESS Short Press to Cycle Quick press the switch to step through brightness levels. No menus, no settings — just fast adjustment while you work. AMBIENT MODE Long Press to Toggle When ambient sensing is on: light stays off in well-lit conditions, turns on automatically when your environment darkens. When off: light stays on continuously. Either way, the light extinguishes automatically when you strike an arc. Package Contents Everything You Need to Start Welding x2Outer cover lens (1 clear HD, 1 blue light filter) x1Inner cover lens x2Extra CR2450 backup batteries x1Carrying bag x1User manual Battery Specs Built-in 3.7V / 1500mAh rechargeable Li-ion polymer battery. Full charge in 2 hours. Runtime: 4+ hours continuous at 100 lm. Backup: 2×CR2450 (included). Technical Specifications Full Spec Sheet Parameter Sensecore X200 View Area 116 × 81 mm Main Window Shade Range W3 / 4–8 / 9–15 External Shade Fine Tuning Manual: 0.5 INC — Auto: 0.1 INC Display Type EPD with Backlight Optical Class V1 (1/1/1/1) Independent Arc Sensors 4 Ambient Light Sensors 1 Switching Time (+55°C) 0.04 ms Light State W3 Delay Time Variable 0.04–2.0 s Memory Channels 9 Modes Weld / Cut / Grind / Black Glass TRS Fade Mode Yes (+ TEST function) Replaceable Battery 2×CR2450 Built-in Battery 3.7V / 1500mAh Li-ion Polymer Charge Time 2 hours Runtime 4+ hours at 100 lm Operating Temperature −10°C to +55°C (14°F to 131°F) How It Compares Sensecore X200 vs Velocity X200 Both helmets share the same optical class, sensor count, and lens size. The X200 goes further with an extended shade range, EPD display, TRS fade mode, and deeper memory and control capabilities. Feature Velocity X200 Sensecore X200 Max Shade DIN 13 DIN 15 Display Monochrome LCD EPD + Backlight TRS Fade Mode No Yes + TEST Memory Channels 9 (read/write combined key) 9 (independent read + write) Outer Knob AUTO long-press No Yes MENU key + lens power off No Yes View Area 116 × 81 mm 116 × 81 mm Arc Sensors 4 4 Optical Class V1 (1/1/1/1) V1 (1/1/1/1) Switching Time 0.04 ms 0.04 ms Delay Range 0.04–2.0 s 0.04–2.0 s Work Light + Ambient Sensing Yes Yes Included Accessories Same Same Optical & Safety Standards Certified Optical Class V1 — The Highest Rating Optical class V1 (1/1/1/1) means the lens meets the most demanding standard for optical clarity in auto-darkening welding helmets — uniform shade, minimal distortion, consistent darkness, and reliable switching. V1Optical Class 0.04msDark Speed 4Arc Sensors IP21SProtection Sensecore X200 — Professional Series Total Control. Zero Compromises. 9-channel memory. Shade 4–15. TRS fade. EPD backlit display. The helmet for welders who run multiple processes and need their equipment to keep up. Shade 4–15 9 Memory Channels EPD Display TRS Fade Mode 4 Arc Sensors V1 Optical Class X200 Pro Series