Colour-Matched Aerosol Spray – Moores - Kensington Breeze

Door Range / Style Moores – Kensington Breeze Matt Trade-grade, colour-matched aerosol spray designed for repairing and refinishing Moores doors and components. Intended Use Edge and face repairs Minor damage and scuff correction Finishing end panels, fillers and plinths Blending additional components to existing Moores installations Vinyl-Wrapped Doors – Important Guidance Suitable for localised repairs and colour blending only. Apply light coats only Best suited to edges, corners and small face repairs Vinyl texture and sheen may vary by production batch and age Always test before full application. Painted / Lacquered Doors – Application Guidance Suitable for: Localised repairs Full panel refinishing Colour-matching additional components Painted surfaces allow greater control of colour depth and sheen uniformity. Recommended Application Clean and degrease the surface thoroughly Lightly key if required Shake aerosol well before use Apply light, even coats Allow flash-off between coats Test in an inconspicuous area first Drying Times (Approximate) Touch dry: 15–20 minutes Recoat: 10–15 minutes Handle with care: 1–2 hours Fully cured: 24 hours Coverage Guidance One aerosol is typically sufficient for multiple small repairs or a single panel, depending on application technique and colour depth. Theoretical coverage: up to 1m² (2 coats). Colour & Finish Disclaimer Moores doors and panels may vary slightly by production batch, age, texture and finish type. While our aerosols are professionally colour-matched, an exact colour or sheen match cannot be guaranteed in all cases. Always test on an inconspicuous area before full application. Trade Use Notice Developed for trade, contract and professional installation use. Safety Use in a well-ventilated area. Follow all instructions and safety information provided on the can.