Ecoglo® C4261 Yellow Anodized Photoluminescent Non-Slip Carpet Stair Nosing 2.7 Inch

Model C4251 • C4-E20 Series Ecoglo® C4251 Black Anodized Photoluminescent Carpet Stair Nosing – Yellow Non-Slip Insert Improve visibility, traction and emergency egress guidance on carpeted stairs with a durable 2.7-inch-wide photoluminescent stair nosing. The Ecoglo® C4251 Photoluminescent Carpet Stair Nosing combines a durable black-anodized aluminum profile, protected photoluminescent step-edge strips and a hard-wearing yellow silicon-carbide non-slip insert. Its carpet-specific profile covers and protects the leading edge of the stair while providing dependable traction and prominent step-edge contrast. The protected photoluminescent strips absorb energy from available natural or artificial light and remain visible when normal lighting is reduced or lost. The system operates without batteries, wiring or ongoing electrical energy consumption. Product Configuration Model C4251 has a black-anodized aluminum profile with a yellow silicon-carbide non-slip insert. The adjacent protected strips are the photoluminescent components. The yellow insert provides high-visibility color contrast and slip resistance but does not itself glow. ✔ Model C4251 ✔ 2.7-Inch-Wide Profile ✔ Yellow Non-Slip Insert ✔ UL 1994 & ULC 572 Listed Photoluminescent Visibility Protected photoluminescent strips remain visible during reduced-light conditions and power outages after exposure to available light. Designed for Carpeted Stairs The specialized aluminum profile covers the leading edge of a carpeted stair and creates a durable transition between the tread and riser. High-Visibility Yellow Contrast The yellow silicon-carbide insert helps clearly identify the stair edge where it contrasts with the surrounding carpet and stair finish. Energy-Free Operation The passive photoluminescent system requires no batteries, wiring or ongoing electrical energy consumption. Ecoglo® C4251 Product Configuration The C4251 combines a black-anodized carpet stair-nosing profile, protected photoluminescent markings and a yellow silicon-carbide non-slip insert. Manufacturer Model C4251 Product Series C4-E20 Aluminum Finish Black Anodized Insert Color Yellow Recommended Applications Carpeted exit stairways Emergency egress routes Office buildings Hotels and hospitality Schools and universities Healthcare facilities Public buildings Commercial facilities Purpose-Built for Carpeted Stair Edges Unlike a flat stair-nosing profile, the C4-E20 carpet profile includes an extended support section designed to create a secure transition at the leading edge of a carpeted stair. Defined step edge Creates a clearly identifiable leading edge where carpet alone may provide limited visual definition. Protected carpet transition The aluminum profile covers the front stair edge and helps protect the carpet transition from repeated foot traffic. Secure installation Designed for installation with premium polyurethane adhesive and mechanical fasteners. Technical Specifications Manufacturer: Ecoglo® Manufacturer Model: C4251 Product Series: C4-E20 Product Type: Photoluminescent carpet stair nosing Base Material: 6063-T5 aluminum Profile Finish: Black-anodized aluminum Anodizing: Type 2, Class 1 Anodized Thickness: Approximately 20 microns Luminous Surface: Protected photoluminescent strips Non-Slip Material: Integrally bonded silicon carbide Insert Color: Yellow Product Weight: Approximately 0.57 lb per linear foot Application: Carpeted stairways Energy Requirement: None Product Dimensions and Ordering Overall Width: Approximately 2.7 inches or 68 mm Non-Slip Insert Width: Approximately 1.5 inches or 37.3 mm Vertical Face: Approximately 1.3 inches or 33.3 mm Internal Horizontal Section: Approximately 1.7 inches or 42.4 mm Profile Depth: Approximately 2.6 inches or 64.9 mm Support Depth: Approximately 0.9 inch or 23.7 mm Standard Lengths: 8 ft and 10 ft Custom Lengths: Available with a tolerance of ± 1/8 inch Insert Supply: Available attached or unattached On-Site Cutting: Unattached inserts are recommended when the profile will be cut on site Installation Information Install the Ecoglo® C4251 using premium polyurethane adhesive and mechanical fasteners. Confirm that the carpet, stair edge and supporting substrate are properly prepared before installation. Pre-Drilled Countersunk Holes Standard holes are positioned approximately 2 inches from each end and approximately 12 inches apart. Included Hardware Pre-drilled profiles are supplied with stainless steel fasteners and concrete nylon anchors. Attached or Unattached Inserts Select unattached inserts when the aluminum profile must be cut to length at the installation site. Listings and Performance Testing The Ecoglo® C4-E20 Series is tested for photoluminescent brightness, slip resistance, UV stability, salt-spray resistance, freeze-thaw performance, abrasion resistance, washability, flammability, radioactivity and toxicity. ✔ UL 1994 and ULC 572 Listed ✔ Slip resistance tested to UL 410 ✔ Slip classification tested to AS/NZS 4586 ✔ Brightness tested to ASTM E2073 ✔ Photoluminescent testing to DIN 67510 Part 1 ✔ Safety-sign performance tested to ISO 17398 ✔ UV exposure tested to ASTM G155 ✔ Salt-spray resistance tested to ASTM B117 ✔ Freeze-thaw resistance tested to ASTM C1026 ✔ Abrasion tested to ASTM D1242 and ASTM F510 ✔ Washability tested to ASTM D4828 ✔ Flammability tested to ASTM E162 and ASTM D635 ✔ Radioactivity tested to ASTM D3648 ✔ Toxicity tested to Bombardier SMP 800-C Egress and Life-Safety Code References Manufacturer documentation references the C4-E20 Series for projects involving the following luminous egress path-marking provisions. Product suitability and final compliance must be confirmed with the project designer and authority having jurisdiction. ✔ IBC/IFC Section 1025 ✔ NFPA 101 ✔ NYC Building Code BC 1025 ✔ NYC Local Law 141 of 2013 ✔ NYC Local Law 26 of 2004 ✔ California Building Code Section 1025 ✔ Connecticut Fire Safety Code Section 1026 Why Specify the Ecoglo® C4251? High-visibility step edge Combines prominent yellow contrast in normal lighting with photoluminescent guidance after normal lighting is lost. Carpet-specific profile Designed to create a secure and clearly defined leading edge on carpeted stairways. Passive emergency guidance Provides photoluminescent visibility without batteries, wiring or emergency electrical power. Durable non-slip surface Integrally bonded silicon carbide provides dependable traction for demanding commercial and public stair applications. Energy-Free, Recyclable Stair Safety ♻ Zero electrical energy consumption ♻ Aluminum-based and recyclable ♻ Approximately 20% recycled aluminum content ♻ Non-radioactive and non-toxic ♻ May support applicable LEED credits ♻ Low-VOC recommended adhesive Frequently Asked Questions What is the Ecoglo® C4251? C4251 is an Ecoglo® C4-E20 photoluminescent carpet stair nosing with a black-anodized aluminum profile and yellow silicon-carbide non-slip insert. Is the C4251 yellow anodized? No. The aluminum profile has a black-anodized finish. Yellow refers to the color of the silicon-carbide non-slip insert. Does the yellow insert glow? No. The yellow insert provides non-slip traction and high-visibility color contrast. The adjacent protected strips are the photoluminescent components. Is the C4251 designed for carpeted stairs? Yes. The C4-E20 profile is specifically designed for installation at the leading edge of carpeted stairways. Is the C4251 UL Listed? The manufacturer identifies the C4-E20 photoluminescent carpet stair-nosing series as UL 1994 and ULC 572 Listed. How wide is the C4251? The overall profile is approximately 2.7 inches or 68 mm wide. The yellow non-slip insert is approximately 1.5 inches or 37.3 mm wide. What lengths are available? Standard manufacturer lengths are 8 ft and 10 ft. Cut-to-length options are available with a tolerance of approximately ± 1/8 inch. How is the C4251 installed? The manufacturer specifies installation with polyurethane adhesive and mechanical fasteners. Pre-drilled profiles include stainless steel fasteners and concrete nylon anchors. Can the C4251 be cut on site? Yes. Unattached inserts are recommended when the aluminum profile will be cut to the required length at the installation site. Specify the Ecoglo® C4251 Select an available length or contact us for custom sizing, commercial quantities, technical documentation and carpet stair installation requirements. View Technical Data Sheet Request a Quote