Bateria Power 130-A Inflatable Fishing Boat – 4 m

A fishing-focused layout for your time on the water The Bateria Power 130-A inflatable fishing boat combines a 4 m gray-and-black hull, EVA-covered aluminum decks and a cushioned seat with backrest. Its open interior and high-pressure drop-stitch floor create a practical starting point for a carefully planned fishing setup. Key features Space for your fishing setup. The 4 m hull provides a 320 × 45 cm interior and a specified maximum load of 400 kg. The open layout gives you room to organize your setup around the central seat. EVA-covered deck surfaces. Two aluminum decks with textured EVA covering form the front and rear platforms. A high-pressure drop-stitch inflatable floor with an EVA anti-slip pad completes the interior. A dedicated seating position. A cushioned seat with a backrest provides a defined place to sit while fishing. The raised frame leaves the floor visible around the seat for a straightforward, uncluttered layout. Separate tube and floor chambers. The design uses three tube air chambers and one floor chamber. Specified construction includes 0.9 mm hull fabric and 1.4 mm bottom protection. Plan a compatible motor setup. The 130-A has a specified maximum motor rating of 10 HP and a maximum outboard weight of 30 kg. Check both limits, the 420 mm transom height and your motor's mounting requirements before fitting. 130-A specifications Model 130-A (YK130A) Overall dimensions 400 × 125 cm / approx. 13.1 × 4.1 ft Interior dimensions 320 × 45 cm / approx. 126 × 17.7 in Maximum load 400 kg / approx. 882 lb Hull and floor net weight 30 kg / approx. 66 lb Accessory net weight 20 kg / approx. 44 lb (front deck, rear deck and seat) Hull fabric thickness 0.9 mm Bottom protection thickness 1.4 mm Tube diameter 20–40 cm, variable profile Tube air chambers 3 Floor air chambers 1 Floor construction High-pressure drop-stitch inflatable floor with EVA anti-slip pad Deck configuration 2 aluminum decks with EVA covering Seat 1 cushioned seat with backrest Carry handles 7 Maximum motor rating 10 HP Maximum outboard weight 30 kg / approx. 66 lb Transom height 420 mm / approx. 16.5 in Tube pressure limit Less than 5 psi Floor pressure limit Less than 15 psi Imperial measurements are approximate conversions of the supplied metric specifications. Hull-and-floor weight and accessory weight are listed separately. Before fitting a motor Choose a motor only after checking its power, total mounted weight, shaft length and mounting fit against the boat specifications. The maximum power and weight figures are limits, not a guarantee that every motor within those limits will fit. Include your intended equipment and supplies when planning the boat's load. Inflation and setup The specification lists tube pressure below 5 psi and floor pressure below 15 psi. These are upper limits, not recommended inflation targets. Follow the product's supplied instructions for working pressures, assembly and operation.