INDX 4-Tool Conversion Kit for CORE One L/L+

Prusa INDX 4-Tool Conversion Kit for CORE One L / L+ The INDX conversion kit turns the Prusa CORE One L or CORE One L+ into a multi-material printer with four tools. Each filament is loaded in its own nozzle. A tool change takes only about 12 seconds and produces roughly 0.013 g of waste. No wipe tower, no pile of purged filament next to the printer. Why a tool changer instead of a single nozzle? Almost no material waste: Instead of purging the nozzle on every change, only a tiny amount is extruded and wiped off. No color bleeding: Every material keeps its own path, for clean color edges from the first layer. Mixed nozzle sizes: 0.25 to 0.8 mm fitted in parallel, for coarse infill and fine details in the same print. Material combinations: rigid PC or PETG with flexible TPU, soluble supports in PVA/BVOH, functional parts with integrated soft grips. Heated chamber remains usable: up to 60 °C, so large ASA and PC parts print without warping. The technology INDX Smart Head: dynamic extruder developed with Bondtech, with automatic tool changer and integrated accelerometer. Induction heating: The nozzle heats up contactlessly within seconds and cools down immediately in the dock, with no oozing. Passive tools: The parked nozzles contain no electronics. Affordable, robust and low-maintenance. Self-adjusting idler tension (Dual Drive DX): Switching from TPU to fiber-reinforced filaments without readjustment. Tool offset sensor: automatic offset calibration in about 15 seconds per toolhead, mounted outside the print area. Load cell bed measurement before every print, nozzle swaps without recalibration. Package contents INDX Smart Head 4 passive toolheads with 0.4 mm nozzle (hardened, nitrocarburized steel, High Flow) Tool offset sensor Two-way nozzle wiper with waste bin 4 spool holders, top cover, plastic parts Assembly tools, printed manual and online assembly guide Access to the Prusa Academy course Technical specifications SystemTool changer with induction-heated nozzles Compatible withPrusa CORE One L and CORE One L+ Number of tools4 Tool change timeapprox. 12 s, approx. 0.013 g waste Max. nozzle temperature300 °C Filament1.75 mm, any brand, no spool chip required Nozzle sizes0.25 / 0.4 / 0.5 / 0.6 / 0.8 mm Standard nozzle0.4 mm High Flow, surface-hardened steel MaterialsPLA, PETG, ASA, ABS, PC, PA, TPU, PVA, BVOH and other non-abrasive filaments Build volume with INDX298 × 275 × 330 mm (−2 mm X, −15 mm Y) Printer dimensions with INDX700 × 530 × 770 mm (W × D × H), 23.9 kg ExtrusionDual Drive (DX) with self-adjusting idler tension Installation notes The conversion is a DIY upgrade: remove the extruder, mount the new components, calibrate. The required time is about 5–6 hours. The kit includes everything needed, including an illustrated step-by-step guide. When using the Advanced Filtration System, 70 mm of additional depth should be planned for. The included nozzles are designed for non-abrasive materials. Guideline values before noticeable quality loss: approx. 10 kg PETG-CF, 5 kg PC-CF or 0.5 kg Prusament Ultraglow. Prints are prepared in PrusaSlicer (Windows, macOS, Linux) or in the browser with EasyPrint, both free of charge. Questions about compatibility or installation? As a certified Prusa partner in Berlin, we are happy to advise and can also carry out the conversion on request.