High/Low Beam Auxiliary Lights with White & Amber DRL for ADV Touring Off-Road Motorcycles

Features: 【LARGER 4.5" DESIGN, SEE FARTHER AT NIGHT】 With more room for powerful LEDs and advanced optics, the 4.5" housing delivers stronger illumination and extended visibility. Perfect for ADV, touring, and long-distance rides in low-light conditions. 【SPOT + FLOOD BEAM COMBO BEAM】 A combined beam pattern provides both long-range visibility and wide road coverage. With 1 Lux@350 meters, you'll spot obstacles sooner and ride with greater confidence after dark. 【WHITE & AMBER DRL SYSTEM】 Switch between white and amber DRL to match changing riding conditions. Includes interchangeable amber lens and protective covers for enhanced visibility and a customized look. 【PRECISE DIMMING FOR EVERY RIDE】 Fine-tune brightness with the rotary controller for the perfect light output in city traffic, mountain roads, fog, group rides, or off-road adventures. Combined with a durable aluminum housing, heat dissipation fin structure, dedicated wiring harness, and 10–30V wide voltage compatibility, it delivers reliable performance on almost any motorcycle. Specification: Size: 4.5Inch Max Power (Pair): 140W Max Output (Pair): 10800LM Beam Pattern: Flood+High Shape: Round Housing Material: Aluminum Position Light: White 6000K+Amber 3000K Operating Voltage: 9-30V DC Current (amps@12.8V): 11 Beam Distance@ILUX: 350m Ingress Protection Rating: IP68 Operating Temperature: -40°C to +85°C Approval: ECE-R10,R148,R149 Life Time: 50000+ hours CRI: ≥70 Compatible Crash Bar Diameter: 22-25MM Certifications: ECE R148, ECE R10, ECE R149 Suitable Applications: Motorcycle/car Auxiliary Lighting, Off-Road Adventures, Camping, Construction Work, Emergency Rescue, Etc. Package Included: 2X LED Auxiliary Light 1X Complete wiring harness Kit (Including Fuse And Switch Interface) Installation Accessories: Brackets, Screws, Washers, Etc. Wiring Instructions: Power Positive (Red Wire) Power Negative (Black Wire) ACC Wire (White Wire) Step 1: Mount the Lights Step 2: Install the Wiring Harness Step 3: Connect Power Step 4: Install the Switch Step5: Test and Adjust (Please refer to the product manual for detailed steps.) Tips & Warnings: Some regions may restrict road use; follow local regulations. Make sure wires are securely fastened to prevent loosening or abrasion while riding. If the installation location is unusual or you are unfamiliar with electrical work, it is recommended to seek assistance from a professional technician. Fitment: Note: This does not mean the product cannot be installed on other models; installation on other vehicles must still be verified on a case-by-case basis based on the mounting bracket, available space, and wiring. Ensure the vehicle has an engine displacement of 250 CC or more, mounting points compatible with M8 screws, and a front guard with a diameter of 0.85 to 1 inch (whether stock or aftermarket). Disclaimer: Bevinsee parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Freightline, etc.